PART I.

MicroVision, Inc. is a pioneer in laser beam scanning (LBS) technology that we market under our brand name PicoP®. We have developed our proprietary scanning technology that can be used in products for interactive projection, consumer light detection and ranging (LiDAR), automotive LiDAR, and augmented and mixed reality. Our PicoP® scanning technology is based on our patented expertise in systems that include micro-electrical mechanical systems (MEMS), laser diodes, opto-mechanics, and electronics and how those elements are packaged into a small form factor, low power scanning module that can display, interact and sense, depending on the needs of the application. These systems utilize edge computing and machine intelligence as part of the solutions.

For the past few years, our strategy has included selling LBS modules designed for original equipment manufacturers (OEMs) and original design manufacturers (ODMs). We planned to offer scanning modules to support a wide array of applications: an interactive scanning module for smart home speakers and other Internet of Things (IoT) products, a LiDAR module for consumer electronic applications, and solutions for augmented and mixed reality devices. We have also been developing our 200+ m range Perceptive automotive lidar module for OEM and Tier 1 acceptance for automotive active collision avoidance systems and autonomous driving vehicles. However, we have been unable to secure a customer to launch one of our module products in 2020. As a result, we plan to focus our attention in the near term on licensing our module products and related technology to other companies. We are also exploring licensing of technology and designs and other strategic alternatives for moving forward without orders from the OEM for 2020 delivery.

We currently sell components to a high definition display system that we developed for a customer under a development agreement. These components are in production, but the volume and associated revenue and gross profit are not sufficient to support our expenses. As a result, we are exploring transferring production to the customer and accepting a royalty for each unit shipped.

To date, we have primarily focused on the consumer electronics market. However, we believe that our LBS technology could support applications and markets including automotive and medical devices.

We have incurred substantial losses since inception and we expect to incur a significant loss during the fiscal year ending December 31, 2020.

MicroVision, Inc. was founded in 1993 as a Washington corporation and reincorporated in 2003 under the laws of the State of Delaware. Our headquarters is located at 6244 185th Avenue NE, Suite 100, Redmond, Washington 98052, and our telephone number is (425) 936-6847.

Our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and all amendments to those reports are available free-of-charge from the investor page of our website, accessible at www.microvision.com, as soon as reasonably practicable after such material is electronically filed with the Securities and Exchange Commission (SEC). Copies of these filings may also be obtained by visiting the SEC's website, www.sec.gov, which contains current, quarterly and annual reports, proxy and information statements and other information regarding issuers that file electronically.

1

Technology

Our patented PicoP® scanning technology combines a MEMS scanning mirror, laser diode light sources, electronics, and optics that are controlled using our proprietary system control algorithms along with edge computing and machine learning in some systems. The MEMS scanning mirror is a key component of our technology system and is one of our core competencies. Our MEMS scanning mirror is a silicon device that oscillates to generate an image pixel-by-pixel for use in sensing and display. Scanning modules with our technology can be designed to operate in one of three different modes: sensing only, display and sensing combined, and display only. For applications that include a projected display, our PicoP® scanning technology creates a brilliant, full color, high-contrast, uniform image over the entire field-of-view from a small and thin module with low power consumption. Our 3D perceptive LiDAR scanning module is small with high resolution, low power and low latency which are features that are important for such applications. We believe that our proprietary technology offers significant advantages over traditional display and 3D Perceptive LiDAR sensing systems. Depending on the specific product application, these advantages may include:

• Ability to perform projection and three-dimensional sensing and image capture from a single device;
• Leveraging our custom MEMS and application-specific integrated circuits (ASICs) components across multiple module types for economies of scale;
• Focus-free operation;
• High resolution (up to 1440p);
• Low power requirements to enable battery operated devices and applications;
• Small and thin module size;
• High-brightness, high-dynamic range, and brightness uniformity;
• Rich, saturated color reproduction;
• Short throw projection with multi-mode operation for table top and wall mode;
• 3D Perceptive LiDAR sensing as a touch interface or point cloud;
• Dynamic, programmable resolution and frame rate 3D scanning; and
• Efficiency of edge computing and machine learning integrated within our solution.

For the past few years, our business strategy has been to commercialize our PicoP® scanning technology by enabling OEMs and ODMs to produce end-user products via several go-to-market paths:

• License our LBS technology, module designs, component designs, and software to OEMs and ODMs to allow them to produce modules to either sell or incorporate in their own products.
• Design and sell LBS modules directly to OEMs and ODMs to incorporate inside their products;
• License our LBS technology and sell key components to OEMs and ODMs to create their own scanning modules; and
• License LBS technology to OEMs and ODMs who developed their own key components or subsystems.

By providing these options, our technology permits OEMs and ODMs to integrate and embed our technology across a broad range of interactive and non-interactive display and 3D Perceptive LiDAR sensing product applications in the way that best matches their technical capabilities and timelines for bringing their products to market.

As discussed above, we plan to focus our attention in the near term on licensing our module products and related technology to other companies.

2

Markets for Our Technology

We believe our PicoP® scanning technology can address the following market segments:

• Interactive and non-interactive projected displays;
• 3D Perceptive LiDAR sensing for consumer electronics;
• Augmented/Mixed Reality (AR/MR);and
• 3D Perceptive LiDAR sensing for automotive active collision avoidance

In interactive projection, our goal is to enable a capacitive touch-like experience on a variety of surfaces by AI devices such as smart speakers. Our module would augment the capabilities of these voice controlled devices making transactions more intuitive and easier to perform. By working on a variety of surfaces our modules provide the functionality of interactive displays while reducing the size requirements of display screens in the home.

We have developed 3D Perceptive LiDAR sensing capabilities in our LBS module. This allows the LBS module to sense what is in front of it and where that object is in space. If we project an image on a surface and use our 3D Perceptive LiDAR sensing capability concurrently, we are able to create an LBS module where a user can touch the projected image or interact with the image using gestures and it will react much like a touchscreen. We call this interactive display. We believe that interactive display can enable a whole new category of smart IoT products.

Additionally, we have developed 3D Perceptive LiDAR sensors. The consumer 3D Perceptive LiDAR sensor is a small sensor able to process what is in front of the sensor with high accuracy and high fidelity for smart home and smart home security products and in commercial space management. We are also working on LiDAR modules for automotive active collision avoidance systems.

Another possible application area for our PicoP® scanning technology is eyewear displays, also known as AR/MR. We have a long history with this application, and we believe our technology is a good fit for this market.

In 2019, our revenue was derived from the sale of components, from development contracts, and from royalty fees for PicoP® scanning technology.

In May 2018, we signed a five-year license agreement with a customer granting them an exclusive license to our LBS technology for display-only applications. The license represents functional intellectual property which derives a substantial portion of its utility from its significant standalone functionality. The intellectual property is not expected to substantially change during the license period, nor are we contractually or practically required to use updated intellectual property during the license life. During the year ended December 31, 2018 we completed the performance obligations required by the contract. As a result, we recognized all of the $10.0 million of license fees paid to us in 2018 as license revenue for the year ended December 31, 2018.

In April 2017, we signed a contract with a major technology company to develop an LBS display system. Under the agreement, we received an upfront payment of $10.0 million in 2017 and, as of December 31, 2019, have also received $15.0 million, net of early payment discounts, representing all payment due for development work. The original contract was for $14.0 million in fees for development work, but we and our customer agreed to add $1.1 million in additional work to total $15.1 million. After applying early payment discounts, we recognized revenue of $15.0 million in development fees over time based on the proportion of total cost expended (under Topic 606, the "input method") to the total cost expected to complete the contract performance obligation. For the year ended December 31, 2019, we recognized $2.9 million of contract revenue from development fees on this agreement compared to $7.4 million during the year ended December 31, 2018.

3

The $10.0 million upfront payment will be recognized as revenue at the point in time future components are sold and transferred to the customer. Based on current pricing and cost estimates, the amount of the per unit upfront payment would be greater than our estimated per unit gross profit. At December 31, 2019 we had $9.8 million of the $10.0 million upfront payment classified as a contract liability on the balance sheet. We have received purchase orders from our customer under the product supply agreement signed in April 2017. We expect to apply an additional $2.3 million over the first three quarters of 2020. To the extent that the component purchases do not fully expend the $10.0 million upfront payment, there is no repayment provision to the customer. As mentioned above, the volume and associated revenue and gross profit from this business is not sufficient to support the company's expenses. As a result, we are exploring transferring production to the customer and accepting a royalty for each unit shipped. We expect any such royalties due would likely be applied against the $9.8 million prepayment until it is exhausted.

We have been working to introduce an interactive display module that integrates display and 3D Perceptive LiDAR sensing to allow the user to interact with projected images and a consumer grade LiDAR module for consumer electronics (smart home and smart home security) applications. We have been unable to obtain a customer that will launch products incorporating our modules in 2020. As a result, we are currently focused on licensing these technologies to other companies that might launch products that include them in the future.

The key components and technology we offer for inclusion in an LBS module are our MEMS, ASICs, and software. Our licensees can purchase none, some, or all of the key components and license the technology we offer depending on their capability and desire to manufacture them and the terms of the licensing agreement.

We believe our research and development efforts have earned us a leadership position in the field of LBS technology and applications as applied to consumer electronics, automotive and other markets. Our ability to attract customers and grow revenue will depend on our ability to maintain our LBS technology leadership, to continually improve performance, reduce costs, reduce the size of component parts and scanning modules, and to increase the number of applications and products enabled by our PicoP® scanning technology.

Our research and development team is located in Redmond, Washington and as of December 31, 2019, was comprised of 60 engineering and technical staff in optics, software engineering, electrical engineering, product engineering, and MEMS design. In February 2020, we reduced headcount by approximately 60% following an OEM's decision not to incorporate our technology into its products. As of March 6, 2020, our research and development team was comprised of 21 engineering and technical staff in optics, software engineering, electrical engineering, product engineering, and MEMS design.

Our sales and marketing approach is account based, business-to-business targeting of OEMs and ODMs. Our business development efforts are headed by executive management and are supported by engineers that assist customers during the design cycles of products. The engineers are located in Redmond, Washington. We engage potential customers directly, participate in trade shows, and maintain a website.

Our products include scanning modules as well as components that are integral to a scanning module. Our scanning module products are manufactured by a contract manufacturer based on our proprietary design and incorporate our PicoP® scanning technology and include MEMS and ASICs that are produced to order by semiconductor foundries.

Our manufacturing is not currently subject to seasonal variations as our shipments have been relatively small and are in the early stages of product introduction. In the future, depending on our customers' product mix, we may be affected by seasonal fluctuations which could affect working capital demands.

We provide forecasts that allow our contract manufacturers to stock component parts and other materials and plan capacity. Our contract manufacturers procure raw materials in volumes consistent with our forecasts, manufacture and/or assemble the products and perform tests according to our specifications. Products are shipped to our customers or shipped to our Redmond, Washington headquarters to be inventoried. We procure some specific components and either sell them or consign them to our contract manufacturers. We hold some inventories of these components. Our contract manufacturers procure additional raw materials we do not own until the finished goods are completed by our contract manufacturer. Title to the products transfers from our contract manufacturers to us and then to our customers

4

when we complete our performance obligations. If raw materials are unused, or the products are not sold within specified periods of time, we may incur carrying charges or obsolete material charges for component parts that our contract manufacturers purchased to build products to meet our forecasts or customer orders.

Many of the raw materials used in our components are standard to the consumer electronics industry. Our MEMS, MEMS die, and ASICs are currently manufactured to our specifications by separate single-source suppliers.

We work with third party independent experts in the field of laser safety to assist in meeting safety specifications. In addition, we monitor developments in the area of permissible laser exposure limits as established by International Electrotechnical Commission (IEC) and others. Independent experts have concluded that laser exposure to the eye resulting from use of LBS devices under normal operating conditions would be below the calculated maximum permissible exposure level set by the IEC.

The consumer display and 3D sensing industries are highly competitive. Potential products incorporating our PicoP® scanning technology, including any LBS modules we develop, will compete with manufacturers of established technologies, such as flat panel display devices, as well as companies developing new display and 3D Perceptive LiDAR sensing technologies. Our competitors include companies such as Texas Instruments, Intel, Syndiant, Innoviz Technologies, Velodyne, Bosch, Quanergy, Innoluce, Opus, Mirrorcle, Maradin, Himax, Pioneer, Sony (LCOS) and others, some of which have much greater financial, technical and other resources than us. Many of our competitors may be currently developing alternative miniature display and 3D Perceptive LiDAR sensing technologies. Our competitors may succeed in developing innovative technologies and products that could render our technology or our proposed products commercially infeasible or technologically obsolete.

The consumer display and 3D sensing industries have been characterized by rapid and significant technological advances. Our PicoP® scanning technology system and potential products may not be competitive with such advances, and we may not have sufficient funds to invest in new technologies, products or processes. Although we believe our technology system and proposed products could deliver images of a substantially higher performance from a smaller form factor device than those of commercially available LCOS and DLP based display products, LCD, OLED, and LCOS interactive panels or solid state LiDAR and CMOS sensing solutions, manufacturers of competing technologies may develop improvements to their technology that could reduce or eliminate the anticipated advantages of our proposed products.

3D sensing is a new market and we believe we are developing products that will have cost and performance benefits over what competitors may offer. However, manufacturers of competing technologies may develop improvements to the size, performance, and cost of their modules, that could reduce or eliminate the anticipated advantages of our proposed products.

We create intellectual property from three sources: internal research and development activities, technology acquisitions, and performance on development contracts. The inventions covered by our patent applications generally relate to systems controls in our PicoP® scanning technology, component miniaturization, power reduction, feature enhancements, specific implementation of various system components, and design elements to facilitate mass production. Protecting these key-enabling technologies and components is a fundamental aspect of our strategy to penetrate diverse markets with unique products. As such, we intend to continue to develop our portfolio of proprietary and patented LBS technologies at the system, component, and process levels.

We believe our extensive patent portfolio is the largest, broadest, and earliest filed LBS technology portfolio. We have been granted over 450 issued patents, pending patents and licensed patents worldwide. As our technology develops, we periodically review our patent portfolio and eliminate patents that are deemed of low value.  Due to this ongoing portfolio management practice, the number of patents in our portfolio will vary at any given time.

5

Since our inception in 1993, we have acquired, either under license agreements or portfolio purchases, patents that grant us exclusive rights to various LBS technologies. From time to time some of these patents may expire, or we may decide to terminate a license agreement for a variety of reasons to better utilize resources expended to maintain intellectual property.

Our ability to compete effectively in the consumer display and 3D sensing markets may depend, in part, on our ability and the ability of our licensors to maintain the proprietary nature of these technologies.

We also rely on unpatented proprietary technology. To protect our rights in these areas, we require all employees, and where appropriate, contractors, consultants, advisors and collaborators, to enter into confidentiality and non-compete agreements. There can be no assurance, however, that these agreements will provide meaningful protection for our trade secrets, know-how or other proprietary information in the event of any unauthorized use, misappropriation or disclosure of such trade secrets, know-how or other proprietary information.

We have registered the name "PicoP®" and "MicroVision®" with the United States Patent and Trademark Office.

As of March 6, 2020, we had 30 full-time employees. None of our employees are represented by a labor union.

We have had substantial losses since our inception. We cannot assure you that we will ever become or remain profitable.

• As of December 31, 2019, we had an accumulated deficit of $572.6 million.
• We had an accumulated deficit of $518.9 million from inception through December 31, 2017, a net loss of $27.3 million in 2018, and a net loss of $26.5 million in 2019.

The likelihood of our success must be considered in light of the expenses, difficulties and delays frequently encountered by companies formed to develop and commercialize new technologies. In particular, our operations to date have focused primarily on research and development of our PicoP® scanning technology system and development of demonstration units. We are unable to accurately estimate future revenues and operating expenses based upon historical performance.

We cannot be certain that we will succeed in obtaining additional development revenue or commercializing our technology or products. In light of these factors, we expect to continue to incur significant losses and negative cash flow at least through 2020 and likely thereafter. There is significant risk that we will not achieve positive cash flow at any time in the future.

We have been unable to secure a customer to launch one of our module products in 2020, as planned. As a result, we plan to focus our attention in the near term on licensing our module products and related technology to other companies. We are also exploring licensing of technology and designs and other strategic alternatives for moving forward without orders from the OEM for 2020 delivery. There is substantial risk that these efforts will be unsuccessful.

Based on our current operating plan that includes anticipated future proceeds from the sale of shares under our existing Purchase Agreement with Lincoln Park Capital Fund, LLC (Lincoln Park), we anticipate that we have sufficient cash and cash equivalents to fund our operations into the second quarter of 2020. We will require additional capital to fund our operating plan past that time. We plan to seek to obtain additional capital through the issuance of equity or debt securities, product sales and/or licensing activities. There can be no assurance that any such efforts to obtain additional capital will be successful.

6

We are introducing new technology and products into an emerging market which creates significant uncertainty about our ability to accurately project revenue, costs and cash flows. Our capital requirements will depend on many factors, including, but not limited to, the commercial success of our LBS modules, the rate at which OEMs and ODMs introduce products incorporating our PicoP® scanning technology and the market acceptance and competitive position of such products. If revenues are less than we anticipate, if the mix of revenues and the associated margins varies from anticipated amounts or if expenses exceed the amounts budgeted, we may require additional capital earlier than expected to fund our operations. In addition, our operating plan provides for the development of strategic relationships with suppliers of components, products and systems, and equipment manufacturers that may require additional investments by us.

Additional capital may not be available to us or, if available, may not be available on terms acceptable to us or on a timely basis. Raising additional capital may involve issuing securities with rights and preferences that are senior to our common stock and may dilute the value of our current shareholders' shares. If adequate capital resources are not available on a timely basis, we may consider limiting our operations substantially and we may be unable to continue as a going concern. This limitation of operations could include reducing investments in our production capacities or research and development projects, staff, operating costs, and capital expenditures which could jeopardize our ability to achieve our business goals or satisfy our customer requirements. In February 2020, we reduced headcount by approximately 60% following an OEM's decision not to incorporate our technology into its products. As a result, further cost reduction efforts may be particularly difficult to implement.

We rely on single or limited-source suppliers to manufacture our products. Establishing a relationship with a new or alternative contract manufacturer(s) or foundry is a time-consuming process, as our unique technology may require significant manufacturing process adaptation to achieve full manufacturing capacity. Accordingly, we may be unable to establish a relationship with new or alternative contract manufacturers in the short-term, or at all, at prices or on other terms that are acceptable to us.

Changes in our supply chain may result in increased cost and delay and may subject us to risks and uncertainties regarding, but not limited to, product warranty, product liability and quality control standards. The loss of any single or limited-source supplier, the failure of any of these suppliers to perform as expected or the disruption in the supply chain of components from these suppliers could cause significant delays in product deliveries, which may result in lost revenues and damaged customer relationships. To the extent that we are not able to establish a relationship with a new or alternative contract manufacturer(s) or foundry in a timely manner, we may be unable to meet contract or production milestones, which could have a material adverse effect on our financial condition, results of operations and cash flows.

Our success will depend, in part, on our ability to provide our components and future products in commercial quantities at competitive prices and on schedule. Accordingly, we will be required to obtain access, through business partners or contract manufacturers, to manufacturing capacity and processes for the commercial production of our expected future products.

Our foreign contract manufacturers could experience severe financial difficulties or other disruptions in their business, and such continued supply could be significantly reduced or terminated. In addition, we cannot be certain that we will successfully obtain access to needed manufacturing resources concurrent with a significant increase in our planned production levels. Future manufacturing limitations of our suppliers could constrain the number of products that we are able to develop and produce.

Our business strategy for commercializing our technology in products incorporating PicoP® scanning technology includes entering into development, manufacturing, licensing, sales and marketing arrangements with OEMs, ODMs and other third parties. These arrangements reduce our level of control over production and distribution and may subject us to risks and uncertainties regarding, but not limited to, product warranty, product liability and quality control standards.

We cannot be certain that we will be able to negotiate arrangements on acceptable terms, if at all, or that these arrangements will be successful in yielding commercially viable products. If we cannot establish these arrangements, we would require additional capital to undertake such activities on our own and would require extensive manufacturing, sales and marketing expertise that we do not currently possess and that may be difficult to obtain.

7

In addition, we could encounter significant delays in introducing our PicoP® scanning technology or find that the development, manufacture or sale of products incorporating our technology would not be feasible. To the extent that we enter into development, manufacturing, licensing, sales and marketing or other arrangements, our revenues will depend upon the performance of third parties. We cannot be certain that any such arrangements will be successful.

Our success will depend in part on customer acceptance of our PicoP® scanning technology. Our technology may not be accepted by manufacturers who use display and 3D sensing technologies in their products, by systems integrators, OEMs, and ODMs who incorporate the scanning module components into their products or by end users of these products. To be accepted, our PicoP® scanning technology must meet the expectations of our current and potential customers in the consumer electronics, automotive, and other markets. If our technology system or products incorporating our PicoP® scanning technology do not achieve market acceptance, we may not be able to continue to develop our technology.

Our PicoP® scanning technology will continue to rely on technologies, such as laser diode light sources and other components that are developed and produced by other companies. The commercial success of certain future products incorporating our PicoP® scanning technology will depend, in part, on advances in these and other technologies by other companies. We may, from time to time, contract with and support companies developing key technologies in order to accelerate the development of them for our or our customers' specific uses. There are no guarantees that such activities will result in useful technologies or products that will be profitable.

In 2019, one customer accounted for $7.7 million in revenue, representing 86% of our total revenue. A second customer accounted for $1.2 million in revenue, representing 13% of our total revenue. In 2018, one customer accounted for $10.0 million in revenue, representing 57% of our total revenue, and a second customer accounted for $7.4 million in revenue, representing 42% of our total revenue. Our customers take time to obtain, and the loss of a significant customer could negatively affect our revenue. Our quarterly operating results may vary significantly based upon:

• Market acceptance of products incorporating our PicoP® scanning technology;
• Changes in evaluations and recommendations by any securities analysts following our stock or our industry generally;
• Announcements by other companies in our industry;
• Changes in business or regulatory conditions;
• Announcements or implementation by our competitors of technological innovations or new products;
• The status of particular development programs and the timing of performance under specific development agreements;
• Economic and stock market conditions; or
• Other factors unrelated to our company or industry.

In one or more future quarters, our results of operations may fall below the expectations of securities analysts and investors and the trading price of our common stock may decline as a consequence. In addition, following periods of volatility in the market price of a company's securities, shareholders often have instituted securities class action litigation against that company.

If we become involved in a class action suit, it could divert the attention of management and, if adversely determined, could require us to pay substantial damages.

8

We or our customers may fail to perform under open orders or agreements, which could adversely affect our operating results and cash flows.

Our backlog under open orders and agreements totaled $6.7 million as of December 31, 2019. We or our customers may be unable to meet the performance requirements and obligations under open orders or agreements, including performance specifications, milestones or delivery dates, required by such purchase orders or agreements. Furthermore, our customers may be unable or unwilling to perform their obligations thereunder on a timely basis, or at all if, among other reasons, our products and technologies do not achieve market acceptance, our customers' products and technologies do not achieve market acceptance or our customers otherwise fail to achieve their operating goals. To the extent we are unable to perform under such purchase orders or agreements or to the extent customers are unable or unwilling to perform, our operating results and cash flows could be adversely affected.

Our common stock is listed on The Nasdaq Global Market. To maintain our listing on this market, we must meet Nasdaq's listing maintenance standards. If we are unable to continue to meet Nasdaq's listing maintenance standards for any reason, our common stock could be delisted from The Nasdaq Global Market.

We received formal notice from the Listing Qualifications Staff of The Nasdaq Stock Market LLC on December 12, 2019.  We requested a hearing before the Nasdaq Hearings Panel (the "Panel"), which would stay any further action by the Staff pending the Panel's decision.  At the hearing we presented our plan to regain compliance with all applicable criteria for continued listing.  On February 4, 2020, we received formal notification from the Panel that it had granted us an extension through June 9, 2020 to evidence compliance with the minimum $1.00 bid price requirement. In order to evidence compliance with the bid price requirement, we must evidence a closing bid price of at least $1.00 per share for a minimum of 10 consecutive business days. We plan to take steps to timely evidence compliance, which may include effecting a reverse stock split if necessary; however, there can be no assurance that we will be able to evidence compliance before the deadline.

If our common stock were delisted, we may seek to list our common stock on a regional stock exchange, or, if one or more broker-dealer market makers comply with applicable requirements, the over-the-counter (OTC) market. Listing on such other market or exchange could reduce the liquidity of our common stock. If our common stock were to trade in the OTC market, an investor would find it more difficult to dispose of, or to obtain accurate quotations for the price of, the common stock.

A delisting from The Nasdaq Global Market could also subject our common stock to so-called penny stock rules that impose additional sales practice and market-making requirements on broker-dealers who sell or make a market in such securities. Consequently, removal from The Nasdaq Global Market and failure to obtain listing on another market or exchange could affect the ability or willingness of broker-dealers to sell or make a market in our common stock and the ability of purchasers of our common stock to sell their securities in the secondary market.

On March 6, 2020, the closing price of our common stock was $0.275 per share.

Our products and potential products incorporating our PicoP® scanning technology will compete with established manufacturers of existing products and companies developing new technologies. Many of our competitors have substantially greater financial, technical and other resources than we have. Because of their greater resources, our competitors may develop products or technologies that may be superior to our own. The introduction of superior competing products or technologies could result in reduced revenues, lower margins or loss of market share, any of which could reduce the value of our business.

The consumer display and 3D sensing industries have been characterized by rapidly changing technology, accelerated product obsolescence and continuously evolving industry standards. Our success will depend upon our ability to further develop our PicoP® scanning technology system and to cost effectively introduce new products and features in a timely manner to meet evolving customer requirements and compete with competitors' product advances. We may not succeed in these efforts due to:

9

• Delays in product development;
• Lack of market acceptance for our technology or products incorporating our PicoP® scanning technology; or
• Lack of funds to invest in product research, development and marketing.

The occurrence of any of the above factors could result in decreased revenues, market share and value of our business.

We are aware of several patents held by third parties that relate to certain aspects of light scanning displays and 3D sensing products. These patents could be used as a basis to challenge the validity, limit the scope or limit our ability to obtain additional or broader patent rights of our patents or patents we have licensed. A successful challenge to the validity of our patents or patents we have licensed could limit our ability to commercialize our technology or products incorporating our PicoP® scanning technology and, consequently, materially reduce our revenues. Moreover, we cannot be certain that patent holders or other third parties will not claim infringement by us with respect to current and future technology. Because U.S. patent applications are held and examined in secrecy, it is also possible that presently pending U.S. applications will eventually be issued with claims that will be infringed by our products or our technology.

The defense and prosecution of a patent suit would be costly and time-consuming, even if the outcome were ultimately favorable to us. An adverse outcome in the defense of a patent suit could subject us to significant costs, require others and us to cease selling products incorporating our technology, require us to cease licensing our technology or require disputed rights to be licensed from third parties. Such licenses, if available, would increase our operating expenses. Moreover, if claims of infringement are asserted against our future co-development partners or customers, those partners or customers may seek indemnification from us for any damages or expenses they incur.

Our ability to successfully offer products incorporating PicoP® scanning technology and implement our business plan in a rapidly evolving market requires an effective planning and management process. The growth in business and relationships with customers and other third parties has placed, and will continue to place, a significant strain on our management systems and resources. We will need to continue to improve our financial and managerial controls, reporting systems and procedures, and will need to continue to train and manage our work force. Following our substantial reduction in headcount in February 2020, the risks associated with strained resources are heightened.

We incur significant costs related to procuring components and increasing our production capabilities to manufacture our products. We may experience delays, cost overruns or other unexpected costs associated with an increase in production. If we are unsuccessful in our efforts to reduce and control our manufacturing, supply chain and operating costs and keep costs aligned with the levels of revenues we generate, our business and financial condition could suffer.

Our technology and products incorporating our PicoP® scanning technology could become subject to future environmental, health and safety regulations or amendments that could negatively impact our ability to commercialize our technology and products incorporating our PicoP® scanning technology. Compliance with any such new regulations would likely increase the cost to develop and produce products incorporating our PicoP® scanning technology, and violations may result in fines, penalties or suspension of production. If we become subject to any environmental, health, or safety laws or regulations that require us to cease or significantly change our operations to comply, our business, financial condition and operating results could be adversely affected.

10

Our operating results may be adversely impacted by worldwide political and economic uncertainties and specific conditions in the markets we address.

Our operating results may be adversely impacted by global economic and financial conditions, which may include slower economic activity, concerns about inflation, increased energy costs, decreased consumer confidence, reduced corporate profits and capital spending. Such adverse business conditions could materially adversely affect: (i) our ability to raise, or the cost of, needed capital, (ii) demand for our current and future products, and (iii) our ability to commercialize products. We cannot predict the timing, strength, or duration of any economic slowdown or subsequent economic recovery, worldwide, regionally or in the display industry.

We currently use foreign contract manufacturers and plan to continue to use foreign contract manufacturers to manufacture current and future products, where appropriate. These international operations are subject to inherent risks, which may adversely affect us, including, but not limited to:

• Political and economic instability;
• High levels of inflation, historically the case in a number of countries in Asia;
• Burdens and costs of compliance with a variety of foreign laws, regulations and sanctions;
• Foreign taxes and duties;
• Changes in tariff rates or other trade, tax or monetary policies; and
• Changes or volatility in currency exchange rates and interest rates.

A major catastrophe, such as an earthquake, monsoon, flood, infectious disease including the 2019 novel coronavirus, or other natural disaster, labor strike, or work stoppage at our contract manufacturers' facilities, our suppliers, or our customers, could result in a prolonged interruption of our business. A disruption resulting from any one of these events could cause significant delays in product shipments and the loss of sales and customers, which could have a material adverse effect on our financial condition, results of operations, and cash flows.

Intellectual property protection for our products, processes and technology is important and uncertain. If we do not obtain effective intellectual property protection for our products, processes and technology, we may be subject to increased competition. Our commercial success will depend, in part, on our ability, to maintain the proprietary nature of our PicoP® scanning technology and other key technologies by securing valid and enforceable patents and effectively maintaining unpatented technology as trade secrets.

We protect our proprietary PicoP® scanning technology by seeking to obtain United States and foreign patents in our name, or licenses to third party patents, related to proprietary technology, inventions, and improvements that may be important to the development of our business. However, our patent position involves complex legal and factual questions. The standards that the United States Patent and Trademark Office and its foreign counterparts use to grant patents are not always applied predictably or uniformly and can change.

Additionally, the scope of patents is subject to interpretation by courts and their validity can be subject to challenges and defenses, including challenges and defenses based on the existence of prior art. Consequently, we cannot be certain as to the extent to which we will be able to obtain patents for our new products and technology or the extent to which the patents that we already own, protect our products and technology. Reduction in scope of protection or invalidation of our licensed or owned patents, or our inability to obtain new patents, may enable other companies to develop products that compete directly with ours on the basis of the same or similar technology.

We also rely on the law of trade secrets to protect unpatented know-how and technology to maintain our competitive position. We try to protect this know-how and technology by limiting access to the trade secrets to those of our employees, contractors and partners, with a need-to-know such information and by entering into confidentiality agreements with parties that have access to it, such as our employees, consultants and business partners. Any of these parties could breach the agreements and disclose our trade secrets or confidential information, or our competitors might learn of the information in some other way. If any trade secret not protected by a patent were to be disclosed to or independently developed by a competitor, our competitive position could be negatively affected.

11

We could be subject to significant product liability claims that could be time-consuming and costly, divert management attention and adversely affect our ability to obtain and maintain insurance coverage.

We could be subject to product liability claims if any of the product applications are alleged to be defective or cause harmful effects. For example, because some of the scanning modules incorporating our PicoP® scanning technology could scan a low power beam of colored light into the user's eye, the testing, manufacture, marketing and sale of these products involve an inherent risk that product liability claims will be asserted against us.

Additionally, any misuse of our technology or products incorporating our PicoP® scanning technology by end users or third parties that obtain access to our technology, could result in negative publicity and could harm our brand and reputation. Product liability claims or other claims related to our products or our technology, regardless of their outcome, could require us to spend significant time and money in litigation, divert management time and attention, require us to pay significant damages, harm our reputation or hinder acceptance of our products. Any successful product liability claim may prevent us from obtaining adequate product liability insurance in the future on commercially desirable or reasonable terms. An inability to obtain sufficient insurance coverage at an acceptable cost or otherwise to protect against potential product liability claims could prevent or inhibit the commercialization of our products and our PicoP® scanning technology.

Our contracts and collaborative research and development agreements have long sales cycles that involve numerous steps including determining the product application, exploring the technical feasibility of a proposed product, evaluating the costs of manufacturing a product or qualifying a new or alternative contract manufacturer for production. Our long sales cycle, which can last several years, makes it difficult to predict the quarter in which revenue recognition will occur. Delays in entering into contracts and collaborative research and development agreements could cause significant variability in our revenues and operating results for any particular period.

Our contracts and collaborative research and development agreements, including without limitation, those discussed in this document, are exploratory in nature and are intended to develop new types of products for new applications. Our efforts may prove unsuccessful and these relationships may not result in the development of any product or any products that will be profitable.

We rely on information technology systems to process, transmit, store, and protect electronic data between our employees, our customers and our suppliers. Our systems are vulnerable to damage or interruptions due to events beyond our control, including, but are not limited to, natural disasters, power loss, telecommunications failures, computer viruses, hacking, or other cyber security issues. Our system redundancy may be inadequate and our disaster recovery planning may be ineffective or insufficient to account for all eventualities. Additionally, we maintain insurance coverage to address certain aspects of cyber risks. Such insurance coverage may be insufficient to cover all losses or all claims that may arise, should such an event occur.

Our success depends on our executive officers and other key personnel and on the ability to attract and retain qualified new personnel. Achievement of our business objectives will require substantial additional expertise in the areas of sales and marketing, research and product development and manufacturing. Competition for qualified personnel in these fields is intense, and the inability to attract and retain additional highly skilled personnel, or the loss of key personnel, could hinder our ability to compete effectively in the LBS markets and adversely affect our business strategy execution and results of operations.

None.

12

ITEM 2. PROPERTIES

In July 2017, we entered into a 65 month facility lease amendment on 31,142 square feet of combined use office, laboratory and manufacturing space at our headquarters facility in Redmond, Washington. The lease agreement includes extension and rent escalation provisions over the term of the lease.

In March 2019, we filed a Notice of Arbitration in Hong Kong against Ragentek as a result of its failure to perform its obligations under a purchase order with us.  The relief sought is $4.0 million dollars plus interest and arbitration costs.  At this time we cannot predict the likelihood of a favorable outcome.

We are subject to various claims and pending or threatened lawsuits in the normal course of business. We are not currently party to any other legal proceedings that we believe are reasonably possible to have a material adverse effect on our financial position, results of operations or cash flows.

Not applicable.

Executive officers are appointed by our Board of Directors and hold office until their successors are elected and duly qualified. The following persons serve as executive officers of MicroVision, Inc.:

Sumit Sharma, age 46, was appointed Chief Executive Officer in February 2020 and served as Chief Operating Officer from June 2018 to February 2020, after serving as Vice President of Product Engineering and Operations since February 2017 and Vice President and Senior Director of Operations since September 2015. Prior to MicroVision, from April 2015 to September 2015, he was a Product Development and Operations consultant at BlueMadison Consulting. From November 2013 to March 2015, he was the Senior Director, Advanced Manufacturing Operations and Technology Development at Jawbone. From March 2011 to October 2013, he was the Head of Manufacturing Operations for project GLASS at Google. Mr. Sharma has extensive experience in optics, wearable technology, product development and qualification for automotive industry.  Mr. Sharma also has deep experience in global operations and developing strategic partnerships. A patent holder, Mr. Sharma received his baccalaureate degree in engineering from New Jersey Institute of Technology.

Stephen P. Holt, age 57, joined MicroVision in April 2013 as Chief Financial Officer. Prior to MicroVision, from May 2007 to May 2012, he served as Chief Financial Officer of PixelOptics, where he played a lead role in bringing the company's first electronic focusing eyewear product to market. At this venture capital-backed start-up, Mr. Holt raised capital and negotiated strategic partner agreements to license technology in addition to implementing policies and procedures to create an infrastructure capable of supporting rapid growth while maintaining a strong internal control environment. From March 2006 to April 2007, he was the Chief Financial Officer of Interstate Distributors, a trucking and transportation services company. From December 2003 to March 2006, he was the Chief Financial Officer of a group of companies consisting of Activelight, Boxlight, Cinelight and Projector Wholesale Supply. These companies were value-added resellers and distributors of audio-visual and projection equipment. Mr. Holt, a Certified Management Accountant, holds a B.S. from California State University, Chico and an M.B.A. from Santa Clara University.

13

David J. Westgor, age 66, was appointed Vice President, General Counsel and Secretary in November 2013, after serving as General Counsel since December 2012 and Deputy General Counsel since June 2007. Before joining MicroVision, Mr. Westgor was Senior Counsel at Medtronic Physio-Control, where he had primary responsibility for the legal affairs of its medical and informatics business units. Mr. Westgor graduated from Loyola Law School and practiced in the Los Angeles office of Pillsbury Winthrop. He moved to the Seattle area to become in-house counsel at Advanced Radio Telecom, a broadband telecommunications company. Mr. Westgor holds a B.A. from St. Olaf College and an M.F.A. degree from the Art Institute of Chicago.

Our common stock began trading publicly on August 27, 1996. Our common stock trades on The Nasdaq Global Market under the ticker symbol "MVIS." We have never declared or paid cash dividends on our common stock. We currently anticipate that we will retain all future earnings to fund the operations of our business and do not anticipate paying dividends on the common stock in the foreseeable future.

As of March 6, 2020, there were approximately 116 holders of record of 128,077,628 shares of common stock outstanding. As many of our shares of common stock are held by brokerages and institutions on behalf of shareholders, we are unable to estimate the total number of beneficial holders of our common stock represented by these record holders.

A summary of selected financial data as of and for the five years ended December 31, 2019 is set forth below. It should be read in conjunction with our consolidated financial statements and related notes appearing elsewhere in this Annual Report on Form 10-K. Amounts shown for the year ended December 31, 2015 do not reflect the effects from our January 1, 2018 adoption of ASC Topic 606.

14

ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

For the past few years, our business strategy has been to commercialize our PicoP® scanning technology by enabling OEMs and ODMs to produce end-user products via several go-to-market paths:

1. License our LBS technology, module designs, component designs, and software to OEMs and ODMs to allow them to produce modules to either sell or incorporate in their own products.
2. Design and sell LBS modules directly to OEMs and ODMs to incorporate inside their products;
3. License our LBS technology and sell key components to OEMs and ODMs to create their own scanning modules; and
4. License LBS technology to OEMs and ODMs who developed their own key components.

As discussed above, we plan to focus our attention in the near term on licensing our module products and related technology to other companies.

In 2019, 47% of our revenue was generated from product shipments to a major technology company, 38% of our revenue was generated from development and support contracts, 13% of our revenue was generated from other product shipments, 1% was generated from performance on contracts for prototype units, and 1% was generated from ongoing per unit royalties. In 2019, one customer accounted for $7.7 million in revenue, representing 86% of our total revenue and a second customer accounted for $1.2 million in revenue, representing 13% of our total revenue.

In 2018, 57% of our revenue was generated from the five-year license agreement we signed in May 2018, 42% of our revenue was generated from development contracts, and 1% was generated from performance on contracts for prototype units. In 2018, one customer accounted for $10.0 million in revenue, representing 57% of our total revenue, and a second customer accounted for $7.4 million in revenue, representing 42% of our total revenue.

We have incurred substantial losses since inception and expect to incur a significant loss during the fiscal year ending December 31, 2020. We have funded operations to date primarily through the sale of common stock, convertible preferred stock, warrants, the issuance of convertible debt and, to a lesser extent, from development contract revenues, product sales and licensing activities. There can be no assurance that additional capital will be available or that, if available, it will be available on terms acceptable to us on a timely basis. We cannot be certain that we will succeed in commercializing our technology or products. These factors raise substantial doubt regarding our ability to continue as a going concern. These financial statements were prepared assuming we will continue as a going concern and do not include any adjustments that might be necessary should we be unable to continue as a going concern.

Our discussion and analysis of our financial condition and results of operations are based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires us to make estimates and judgments that materially affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent liabilities. We evaluate our estimates on a continuous basis. We base our estimates on historical data, terms of existing contracts, our evaluation of trends in the consumer display and 3D sensing industries, information provided by our current and prospective customers and strategic partners, information available from other outside sources and on various other assumptions we believe to be reasonable under the circumstances. The results form the basis for making judgments regarding the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

We believe the following key accounting policies require significant judgments and estimates used in the preparation of our consolidated financial statements.

Revenues are recognized when control of the promised goods or services are transferred to our customers, in an amount that reflects the consideration that we expect to receive in exchange for those goods or services. We generate all of our revenue from contracts with customers.

Our contract revenue in a particular period is dependent upon when we enter into a contract, the value of the contracts we have entered into, and the availability of technical resources to perform work on the contracts. We recognize contract revenue either at a point in time, or over time, depending upon the characteristics of the individual contract. If control of the deliverable(s) occur over time, the revenue is recognized in proportion to the transfer of control. If control passes to the customer only upon completion and transfer of the asset, revenue is recognized at the completion of the contract. In contracts that include significant customer acceptance provisions, we recognize revenue only upon acceptance of the deliverable(s).

15

We identify each performance obligation in our development contracts at contract inception. The contracts generally include product development and customization specified by the customer. In contracts with multiple performance obligations, we identify each performance obligation and evaluate whether the performance obligations are distinct within the context of the contract. Determining whether products and services are considered distinct performance obligations that should be accounted for separately versus together may require significant judgment. Performance obligations that are not distinct at contract inception are combined.

If we identify multiple distinct performance obligations, we evaluate each performance obligation to determine if there is a stand-alone selling price. In instances where stand-alone selling price is not directly observable, such as when we do not sell the product or service separately, we determine the stand-alone selling price using information that may include market conditions and other observable inputs. Judgment is required to determine the stand-alone selling price for each distinct performance obligation.

Our development contracts are primarily fixed-fee contracts. If control of deliverables occurs over time, we recognize revenue on fixed fee contracts on the proportion of total cost expended (under Topic 606, the `input method') to the total cost expected to complete the contract performance obligation. For contracts that require the input method for revenue recognition, the determination of the total cost expected to complete the performance obligations on fixed fee contracts involves significant judgment. We incorporate revisions to hour and cost estimates when the causal facts become known.

Inventory is computed using the first-in, first-out (FIFO) method and is stated at the lower of cost and net realizable value. We make judgments and estimates to value our inventory and make adjustments to its carrying value. We review several factors in determining the market value of our inventory including: evaluating the replacement cost of the raw materials, the net realizable value of the finished goods, and the likelihood of obsolescence. If we do not achieve our targeted sales prices, if market conditions for our components or products were to decline, or if we do not achieve our sales forecast, additional reductions in the carrying value of the inventory would be required.

We issue share-based compensation to employees in the form of stock options and restricted stock units (RSUs), and performance stock units (PSUs). We account for the share-based awards by recognizing the fair value of share-based compensation expense on a straight-line basis over the service period of the award, net of estimated forfeitures. The fair value of stock options is estimated on the grant date using the Black-Scholes option pricing model. The fair value of RSUs is determined by the closing price of our common stock on the grant date. The PSUs are valued using a binomial option pricing model using the following inputs: stock price, volatility, and risk-free interest rates. Changes in estimated inputs or using other option valuation methods may result in materially different option values and share-based compensation expense.

Significant judgment may be required when determining whether a contract contains a lease, the length of the lease term, the allocation of the consideration in a contract between lease and non-lease components, and the determination of the discount rate included in our office lease. We review the underlying objective of each contract, the terms of the contract, and consider our current and future business conditions when making these judgments.

Significant judgment is required in evaluating our tax position and in determining our provision for income taxes, our deferred tax assets and liabilities and any valuation allowance recorded against our net deferred tax assets. We record a valuation allowance when necessary to reduce deferred tax assets to the amount expected to be realized. Based on our history of losses since inception, the available objective evidence creates sufficient uncertainty regarding the realizability of the deferred tax assets. Our actual tax exposure may differ from our estimates and any such differences may impact income our tax expense in the period in which such determination is made.

16

The key accounting policies described above are not intended to be a comprehensive list of all of our accounting policies. In many cases, the accounting treatment of a particular transaction is specifically dictated by generally accepted accounting principles, with no need for us to apply judgment or make estimates. There are also areas in which our judgment in selecting any available alternative would not produce a materially different result to our consolidated financial statements. Additional information about our accounting policies, and other disclosures required by generally accepted accounting principles, are set forth in the notes to our consolidated financial statements.

Inflation has not had a material impact on our revenues or income from continuing operations over the three most recent fiscal years.

Product revenue is revenue from sales of our products which are LBS modules and their components. Revenue is recognized when control of the goods passes to the customer.

The increase in product revenue for the year ended December 31, 2019 compared to the same period in 2018 was primarily due to product shipments to a major technology company. Product revenue includes $1.2 million related to the sale of display modules that had been produced for Ragentek and delivered to our distributor in 2017. Our distributor made payments in excess of revenue recognized and Ragentek failed to meet their obligations under the March 2017 order. During 2019, the remaining units held by our distributor were sold to other customers and we reached an agreement with our distributor on the final transaction price of the units shipped to them. As part of the agreement, we have agreed to return $432,000 of the original transaction price to our distributor.

Product revenue backlog at December 31, 2019 and 2018 was $6.7 million and zero, respectively. The December 31, 2019 backlog is primarily due to the production orders received from a major technology company under the product supply agreement signed in April 2017. Product revenue backlog at December 31, 2019 does not include the $9.8 million contract liability on our balance sheet.

License and royalty revenue is revenue under license agreements to our PicoP® scanning technology. We recognize revenue on upfront license fees at a point in time if the nature of the license granted is a right-to-use license, representing functional intellectual property with significant standalone functionality. If the nature of the license granted is a right-to-access license, representing symbolic intellectual property, which excludes significant standalone functionality, we recognize revenue over the period of time we have ongoing obligations under the agreement. We will recognize revenue from sales-based royalties based on information received by our customers. If such information is not received, we will estimate the number of royalty-bearing products consumed by our customers each quarter.

In May 2018, we signed a five-year license agreement with a customer granting them exclusive license to our LBS technology for display-only applications. The license represents functional intellectual property which derives a substantial portion of its utility from its significant standalone functionality. The intellectual property is not expected to substantially change during the license period, nor are we contractually or practically required to use updated intellectual property during the license life. During the year ended December 31, 2018 we completed the performance obligations required by the contract. As a result, we recognized all of the $10.0 million in up-front license payments in license revenue during the year ended December 31, 2018.

17

Contract revenue

Contract revenue includes revenue from performance on development contracts and the sale of prototype units and evaluation kits based on our PicoP® scanning module. Our contract revenue in a particular period is dependent upon when we enter into a contract, the value of the contracts we have entered into, and the availability of technical resources to perform work on the contracts. We recognize contract revenue either at a point in time, or over time, depending upon the characteristics of the individual contract. If control of the deliverable(s) occur over time, the revenue is recognized in proportion to the transfer of control. If control passes to the customer only upon completion and transfer of the asset, revenue is recognized at the completion of the contract. In contracts that include significant customer acceptance provisions, we recognize revenue only upon acceptance of the deliverable(s).

In April 2017, we signed a contract with a major technology company to develop an LBS display system.  As of December 31, 2019, we have received all payments due for development work. We have recognized revenue of $15.0 million in development fees, net of early payment discounts, over time utilizing the input method of total costs expended to total cost expected to complete the performance obligation. The original contract was for $14.0 million in fees for development, but we and the customer agreed to add $1.1 million in additional work to total $15.1 million.

The decrease in contract revenue during the year ended December 31, 2019 compared to the same period in 2018 was attributed to decreased contract activity. Our contract backlog, including orders for prototype units and evaluation kits, at December 31, 2019 and 2018 was approximately zero and $2.5 million, respectively.

Cost of product revenue includes the direct and allocated indirect costs of products sold to customers. Direct costs include labor, materials, reserves for estimated warranty expenses, and other costs incurred directly, or charged to us by our contract manufacturers, in the manufacture of these products. Indirect costs include labor, manufacturing overhead, and other costs associated with operating our manufacturing capabilities and capacity. Manufacturing overhead includes the costs of procuring, inspecting and storing material, facility and other costs, and is allocated to cost of product revenue based on the proportion of indirect labor which supported production activities.

Cost of product revenue can fluctuate significantly from period to period, depending on the product mix and volume, the level of manufacturing overhead expense and the volume of direct material purchased. The increase during the year ended December 31, 2019 compared to the same period in 2018 was attributed primarily to product shipments to a major technology company. Inventory write-downs of $2.2 million and $4.4 million were recorded in 2019 and 2018, respectively.

Cost of contract revenue includes both the direct and allocated indirect costs of performing on contracts and producing prototype units and evaluation kits. Direct costs include labor, materials and other costs incurred directly in producing prototype units and evaluation kits or performing on a contract. Indirect costs include labor and other costs associated with operating our research and development department and building our technical capabilities and capacity. Cost of contract revenue is determined by the level of direct and indirect costs incurred, which can fluctuate substantially from period to period.

18

The decrease in the cost of contract revenue during the year ended December 31, 2019 compared to the same period in 2018 was attributed to reduced activity on the April 2017 development contract.

Research and development expense consists of compensation related costs of employees and contractors engaged in internal research and product development activities, direct material to support development programs, laboratory operations, outsourced development and processing work, and other operating expenses. We assign our research and development resources based on the business opportunity of the available projects, the skill mix of the resources available and the contractual commitments we have made to our customers. We believe that a substantial level of continuing research and development expense will be required to further develop our scanning technology.

The decrease in research and development expense during the year ended December 31, 2019 compared to the same period in 2018 was attributable to lower subcontractor costs and personnel-related compensation and benefits expenses offset by higher allocation of resources to internal research and development activities that were previously allocated to a commercial contract and higher direct materials costs related to our LBS module development.

Sales, marketing, general and administrative expense includes compensation and support costs for marketing, sales, management and administrative staff, and for other general and administrative costs, including legal and accounting services, consultants and other operating expenses.

The decrease in sales, marketing, general and administrative expense during the year ended December 31, 2019 compared to the same period in 2018 was attributed to lower personnel- related compensation and benefits expenses and lower professional and outside services costs.

No provision for income taxes has been recorded because we have experienced net losses from inception through December 31, 2019. At December 31, 2019, we had net operating loss carryforwards of approximately $405.8 million for federal income tax reporting purposes. In addition, we have research and development tax credits of $9.0 million. During 2019, $17.1 million federal net operating losses expired unused. A majority of the net operating loss carryforwards and research and development credits available to offset future taxable income, if any, will expire in varying amounts from 2020 to 2039, if not previously used.

In certain circumstances, as specified in the Internal Revenue Code, a 50% or more ownership change by certain combinations of our shareholders during any three year period would result in a limitation on our ability to use a portion of our net operating loss carryforwards.

We recognize interest accrued and penalties related to unrecognized tax benefits in tax expense. We did not have any unrecognized tax benefits at December 31, 2019 or at December 31, 2018.

We have incurred significant losses since inception. We have funded operations to date primarily through the sale of common stock, convertible preferred stock, warrants, the issuance of convertible debt and, to a lesser extent, from development contract revenues, product sales, and licensing activities. At December 31, 2019, we had $5.8 million in cash and cash equivalents.

Based on our current operating plan that includes anticipated future proceeds from the sale of shares under our existing Purchase Agreement with Lincoln Park, we anticipate that we have sufficient cash and cash equivalents to fund our operations into the second quarter of 2020. We will require additional capital to fund our operating plan past that time.

19

We plan to obtain additional capital through the issuance of equity or debt securities, product sales and/or licensing activities. There can be no assurance that additional capital will be available to us or, if available, will be available on terms acceptable to us or on a timely basis. If adequate capital resources are not available on a timely basis, we intend to consider limiting our operations substantially. This limitation of operations could include reducing investments in our production capacities, research and development projects, staff, operating costs, and capital expenditures. Following our substantial reduction in headcount in February 2020, additional cost savings may be difficult to identify and achieve.

Under the April 2017 development contract, we received an upfront payment of $10.0 million in 2017 with a major technology company. The $10.0 million upfront payment will be applied as an upfront payment toward future component purchases from us. Based on current pricing and cost estimates, the amount of per unit upfront payment would be greater than our estimated per unit gross profit and therefore will have a negative impact on our reported cash flow from operating activities until the upfront payment has been earned.

These factors raise substantial doubt regarding our ability to continue as a going concern. Our consolidated financial statements have been prepared assuming we will continue as a going concern and do not include any adjustments that might be necessary should we be unable to continue as a going concern.

Cash used in operating activities totaled $24.0 million during 2019, compared to $22.6 million in 2018. Cash used in operating activities resulted primarily from cash used to fund our net loss, after adjusting for non-cash charges such as share-based compensation, depreciation and amortization charges and changes in operating assets and liabilities. The changes in cash used in operating activities were primarily attributed to the timing of payments received from customers and payments made to suppliers during the year ended December 31, 2019 compared to the year ended December 31, 2018.

Cash used in investing activities totaled $745,000 in 2019, compared to $1.1 million in 2018 and was primarily attributed to purchases of equipment.

Cash provided by financing activities totaled $16.9 million in 2019, compared to $20.5 million in 2018. Principal payments under finance leases was $20,000 in 2019 and $12,000 in 2018.

The following is a list of our financing activities during 2019 and 2018.

• In December 2019, we entered into a Common Stock Purchase Agreement with Lincoln Park granting us the right to sell shares of our common stock having an aggregate value of up to $16.0 million. Under the terms of the agreement, Lincoln Park made an initial purchase of 1.5 million shares of common stock for $1.0 million at a purchase price of $0.6531 per share. Subject to various limitations and conditions set forth in the agreement, we may sell up to an additional $15.0 million in shares of common stock, from time to time, at our sole discretion to Lincoln Park over a 24-month period beginning December 2019. In consideration for entering into the agreement, we issued 375,000 shares of our common stock, having a value of $277,000, based on the closing stock price at the date of grant, to Lincoln Park as a commitment fee. We incurred an additional $90,000 in issuance costs.
• In July 2019, we raised $2.0 million before issuance costs of approximately $24,000 through a registered direct offering of 3.0 million shares of our common stock to a private investor.
• In April 2019, we raised $2.0 million before issuance costs of approximately $34,000 through a registered direct offering of 2.3 million shares of our common stock to a private investor.
• In April 2019, we entered into a Common Stock Purchase Agreement with Lincoln Park granting us the right to sell shares of our common stock having an aggregate value of up to $11.0 million. Under the terms of the agreement, Lincoln Park made an initial purchase of $1.0 million in shares of common stock at a purchase price of $0.98 per share. Subject to various limitations and conditions set forth in the agreement, we may sell up to an additional $10.0 million in shares of common stock, from time to time, at our sole discretion to Lincoln Park over a 24-month period beginning April 2019. In consideration for entering into the agreement, we issued 250,000 shares of our common stock, having a value of $258,000, based on the closing stock price at the date of grant, to Lincoln Park as a commitment fee. We incurred an additional $92,000 in issuance costs. As of December 31, 2019, we have issued 15.7 million shares and raised a total of $11.0 million under this agreement. No further shares are available for sale under this agreement.

20

• In January 2019, we raised $1.2 million before issuance costs of approximately $26,000 through a registered direct offering of 2.0 million shares of our common stock to a private investor.
• In December 2018, we raised $4.2 million before issuance costs of approximately $524,000 through an underwritten public offering of 7.0 million shares of our common stock.
• In June 2018, we raised $18.0 million before issuance costs of approximately $1.4 million through an underwritten public offering of 14.4 million shares of our common stock.

Our capital requirements will depend on many factors, including, but not limited to, the rate at which OEMs and ODMs introduce products incorporating our PicoP® scanning technology and the market acceptance and competitive position of such products. Our ability to raise capital will depend on numerous factors, including the following:

• Perceptions of our ability to continue as a going concern;
• Market acceptance of products incorporating our PicoP® scanning technology;
• Changes in evaluations and recommendations by any securities analysts following our stock or our industry generally;
• Announcements by other companies in our industry;
• Changes in business or regulatory conditions;
• Announcements or implementation by our competitors of technological innovations or new products;
• The status of particular development programs and the timing of performance under specific development agreements;
• Economic and stock market conditions;
• The cost of filing, prosecuting, defending and enforcing any patent claims and other intellectual property rights;
• Our ability to establish cooperative development, joint venture and licensing arrangements; or
• Other factors unrelated to our company or industry.

If we are successful in establishing OEM or ODM co-development and joint venture arrangements, we expect our partners to fund certain non-recurring engineering costs for technology development and/or for product development. Nevertheless, we expect our capital requirements to remain high as we expand our activities and operations with the objective of commercializing our PicoP® scanning technology.

The following table lists our contractual obligations as of December 31, 2019 (in thousands):

See Note 2, "Summary of significant accounting policies," in the Notes to the consolidated financial statements found in Part II, Item 8 of this Form 10-K.

21

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

As of December 31, 2019, all of our cash and cash equivalents have variable interest rates. Therefore, we believe our exposure to market and interest rate risks is not material.

Our investment policy generally directs that the investment managers should select investments to achieve the following goals: principal preservation, adequate liquidity, and return. As of December 31, 2019, our cash and cash equivalents are comprised of short-term highly rated money market savings accounts. The values of cash and cash equivalents as of December 31, 2019, are as follows (in thousands):

Our major contract and collaborative research and development agreements, product sales, and licensing activity payments are currently made in U.S. dollars. However, in the future we may enter into contracts or collaborative research and development agreements in foreign currencies that may subject us to foreign exchange rate risk. We have entered into purchase orders and supply agreements in foreign currencies in the past and may enter into such arrangements, from time to time, in the future. We believe our exposure to currency fluctuations related to these arrangements is not material. We may enter into foreign currency hedges to offset material exposure to currency fluctuations when we can adequately determine the timing and amounts of the exposure.

22

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

23

To the Shareholders and the Board of Directors of
MicroVision, Inc.

We have audited the accompanying consolidated balance sheets of MicroVision, Inc. (the "Company") as of December 31, 2019 and 2018, the related consolidated statements of operations, shareholders' equity (deficit), and cash flows for the years then ended, and the related notes and schedule (collectively referred to as the "consolidated financial statements"). In our opinion, the consolidated financial statements present fairly, in all material respects, the consolidated financial position of the Company as of December 31, 2019 and 2018, and the consolidated results of its operations and its cash flows for the years then ended, in conformity with accounting principles generally accepted in the United States of America.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) ("PCAOB"), the Company's internal control over financial reporting as of December 31, 2019, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated March 11, 2020, expressed an unqualified opinion on the Company's internal control over financial reporting.

The accompanying consolidated financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 1 to the consolidated financial statements, the Company has suffered recurring losses from operations and has an accumulated deficit that raise substantial doubt about its ability to continue as a going concern. Management's plans in regard to these matters are also described in Note 1. The consolidated financial statements do not include any adjustments that might result from the outcome of this uncertainty.

As discussed in Note 11 to the consolidated financial statements, the Company changed its method of accounting for leases in 2019.

These consolidated financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's consolidated financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures to respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

/s/ Moss Adams LLP

Seattle, Washington
March 11, 2020

We have served as the Company's auditor since 2012.

24

MicroVision, Inc.
Consolidated Balance Sheets
(In thousands)

25

MicroVision, Inc.
Consolidated Statements of Operations
(In thousands, except per share data)

26

MicroVision, Inc.
Consolidated Statements of Shareholders' Equity (Deficit)
(In thousands)

27

MicroVision, Inc.
Consolidated Statements of Cash Flows
(In thousands)

28

MicroVision, Inc.
Notes to Consolidated Financial Statements
For the year ended December 31, 2019