UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

FORM 10-Q

☒ QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended March 31, 2022

OR

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ________to _________

Commission file number    001-34170

MicroVision, Inc.
(Exact name of registrant as specified in its charter)

6244 185th Avenue NE, Suite 100
Redmond, Washington 98052
(Address of Principal Executive Offices, including Zip Code)

(425) 936-6847
(Registrant's Telephone Number, including Area Code)

Securities registered pursuant to Section 12(b) of the Act:

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file reports), and (2) has been subject to such filing requirements for the past 90 days.

YES    ☒       NO    ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).

YES    ☒       NO    ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See definitions of "large accelerated filer," "accelerated filer," "smaller reporting company" and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer ☒   Accelerated filer ☐   Non-accelerated filer ☐    Smaller reporting company ☐   Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

YES    ☐       NO    ☒

The number of shares of the registrant’s common stock outstanding as of April 25, 2022 was 165,209,972.

PART I.

ITEM 1. FINANCIAL STATEMENTS

MicroVision, Inc.
Condensed Balance Sheets
(In thousands, except per share data)

(Unaudited)

The accompanying notes are an integral part of these financial statements.

MicroVision, Inc.
Condensed Statements of Operations
(In thousands, except per share data)
(Unaudited)

The accompanying notes are an integral part of these financial statements.

MicroVision, Inc.

Condensed Statements of Comprehensive Loss
(In thousands)

(Unaudited)

The accompanying notes are an integral part of these financial statements.

MicroVision, Inc.
Condensed Statements of Shareholders’ Equity
(In thousands)
(Unaudited)

The accompanying notes are an integral part of these financial statements.

MicroVision, Inc.
Condensed Statements of Cash Flows
(In thousands)
(Unaudited)

The accompanying notes are an integral part of these financial statements.

MicroVision, Inc.
Notes to Condensed Financial Statements
(Unaudited)

ITEM 2. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Forward-looking statements

The information set forth in this report in Item 2, "Management's Discussion and Analysis of Financial Condition and Results of Operations," and Item 3, "Quantitative and Qualitative Disclosures about Market Risk," includes "Forward-Looking Statements" within the meaning of Section 27A of the Securities Act of 1933, as amended (the "Securities Act"), and Section 21E of the Securities Exchange Act of 1934, as amended (the "Exchange Act"), and is subject to the safe harbor created by those sections. Such statements may include, but are not limited to, projections of revenues and expenses, and measures of income or loss, status of product development and performance, market opportunity and future demand, partner and customer engagements, strategic plans, future operations, financing needs or plans of MicroVision, Inc. (“we,” “our,” or “us”), as well as assumptions relating to the foregoing. The words "anticipate," "could," "believe," "estimate," "expect," "goal," "may," "plan," and similar expressions identify forward-looking statements. Factors that could cause actual results to differ materially from those projected in our forward-looking statements include risk factors identified below in Item 1A.

Overview

MicroVision, Inc. is a pioneer in laser beam scanning, or LBS, technology, which is based on our patented expertise in micro-electromechanical systems, or MEMS, laser diodes, opto-mechanics, electronics, algorithms and software and how those elements are packaged into a small form factor. Throughout our history, we have combined our proprietary technology with our development expertise to create innovative solutions to address existing and emerging market needs, such as augmented reality microdisplay engines; interactive display modules; consumer lidar components; and, most recently, automotive lidar sensors and solutions for the automotive market.

Currently, our development efforts are primarily focused on automotive lidar sensors and perception software for advanced driver-assistance systems, or ADAS. Our integrated solution will combine our MEMS-based lidar sensor, custom ASICs, and software targeted for sale to automotive OEMs and Tier-1 automotive suppliers.

We believe that our MEMS-based lidar sensor demonstrates best-in-class features and performance that can exceed market expectations and outperform competitive products. In 2021 we completed our A-Sample long range lidar module, and we are continuing to advance our lidar sensor and refine its features.

Our ADAS solution is intended to leverage edge computing and custom ASICs to enable our hardware and sensor fusion software to be integrated into an OEM’s ADAS stack. We are continuing to refine our technology and products and we expect to test our solution and demonstrate its capabilities during the first half of 2022. Although we are forecasting small quantities of sales in 2022, we do not expect to achieve significant, sustained revenue from our ADAS solution in the near term.

In the recent past, we developed micro-display concepts and designs for use in head-mounted AR headsets and developed a 1440i MEMS module that can support AR headsets. We also developed a display solution targeted at the smart speakers market, which we call an Interactive Display module. The display was designed to project onto a countertop, tabletop or a wall from inside a smart speaker. The user could then touch the projected image on any surface on which the display is visible and it will behave like a touchscreen, as on a tablet or smartphone. In addition, we developed a small lidar sensor, which we call Consumer Lidar, for use indoors with smart home systems. It was designed to allow for a smart home system to understand what is happening in the home and then enable the smart home to respond in an appropriate way.

Although our development and productization efforts are now solely focused on our ADAS solution, our revenue in the two fiscal years ended December 31, 2021 was derived from one customer, Microsoft Corporation, related to components that we developed for a high-definition display system. Our arrangement with this customer generates royalty income; however, the volume of sales and resulting royalties from that arrangement are not significant.

We have been unable to secure the customers needed to successfully launch our products. We have incurred substantial losses since inception, and we expect to incur a significant loss during the fiscal year ending December 31, 2022.

Continuing Impact of COVID-19 on Our Business

Our business operations continue to be impacted by the ongoing COVID-19 pandemic. Government restrictions in the early days of the pandemic caused us to mostly close our offices in early 2020. To support our hardware development efforts, we reopened our offices in July 2021 while maintaining compliance with government mandates and health agency protocols, including masking requirements and encouraging vaccination. Some of our office employees continue to work remotely or on hybrid schedules. We may experience reductions in productivity and disruptions to our business routines while our hybrid work policy remains in place, or if our employees become ill and are unable to work, which could have an adverse effect on the timing of our development and productization activities. We will continue to prioritize the health and safety of our employees as we adapt our workplace policies based on evolving government regulation, health agency advice, and industry best practice.

In addition, several of our suppliers have experienced closures or have been operating at reduced capacity, resulting in lower component availability. Continued disruptions to our supply chain could have a material impact on our development and future operations. Moreover, various global travel restrictions and office closures have hampered our business development efforts, making it more difficult to engage with potential customers and partners, which could have a material negative impact on our business prospects.

Key accounting policies and estimates

Our discussion and analysis of our financial condition and results of operations are based upon our financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires us to make estimates and judgments that materially affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent liabilities. We evaluate our estimates on a continuous basis. We base our estimates on historical data, terms of existing contracts, our evaluation of trends in the consumer display and 3D sensing industries, information provided by our current and prospective customers and strategic partners, information available from other outside sources and on various other assumptions we believe to be reasonable under the circumstances. The results form the basis for making judgments regarding the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions. There have been no significant changes to our critical accounting judgments, policies, and estimates as described in our Annual Report on Form 10-K for the year ended December 31, 2021.

Results of operations

License and royalty revenue

License and royalty revenue is revenue under license agreements to our PicoP® scanning technology. We recognize revenue on upfront license fees at a point in time if the nature of the license granted is a right-to-use license, representing functional intellectual property with significant standalone functionality. If the nature of the license granted is a right-to-access license, representing symbolic intellectual property, which excludes significant standalone functionality, we recognize revenue over the period of time we have ongoing obligations under the agreement. We will recognize revenue from sales-based royalties on the basis of the quarterly reports provided by our customer as to the number of royalty-bearing products sold or otherwise distributed. In the event that reports are not received, we will estimate the number of royalty-bearing products sold by our customers.

The decrease in license and royalty revenue for the three months ended March 31, 2022 compared to the same period in 2021 was due to a lower number of royalty-bearing products being distributed by our customer.

Cost of product revenue

Cost of product revenue includes the direct and allocated indirect costs of products sold to customers. Direct costs include labor, materials, reserves for estimated warranty expenses, and other costs incurred directly, or charged to us by our contract manufacturers, in the manufacture of these products. Indirect costs include labor, manufacturing overhead, and other costs associated with operating our manufacturing capabilities and capacity. Manufacturing overhead includes the costs of procuring, inspecting and storing material, facility and other costs, and is allocated to cost of product revenue based on the proportion of indirect labor which supported production activities.

Cost of product revenue can fluctuate significantly from period to period, depending on the product mix and volume, the level of manufacturing overhead expense and the volume of direct material purchased. The credit of $5,000 for the three months ending March 31, 2021 is related to the reversal of accrued warranty liabilities since warranty claims were less than expected.

Research and development expense

Research and development expense consists of compensation related costs of employees and contractors engaged in internal research and product development activities, direct material to support development programs, laboratory operations, outsourced development and processing work, and other operating expenses. We assign our research and development resources based on the business opportunity of the available projects, the skill mix of the resources available and the contractual commitments we have made to our customers. We believe that a substantial level of continuing research and development expense will be required to further develop our scanning technology.

The increase in research and development expense during the three months ended March 31, 2022 compared to the same period in 2021 was primarily due to increased salary and benefits expenses as a result of increased headcount of approximately $1.5 million, higher non-cash compensation expense of $648,000, and higher non-labor direct expenses related to the development of our lidar sensor of $611,000.

Sales, marketing, general and administrative expense

Sales, marketing, general and administrative expense includes compensation and support costs for marketing, sales, management and administrative staff, and for other general and administrative costs, including legal and accounting services, consultants and other operating expenses.

The increase in sales, marketing, general and administrative expense during the three months ended March 31, 2022 compared to the same period in 2021 was primarily attributed to higher non-cash compensation expense of $1.4 million, increased professional services and consulting costs of $804,000, increased business insurance expense of $565,000, and increased salary and benefits expenses as a result of increased headcount of approximately $493,000.

Liquidity and capital resources

We have incurred significant losses since inception. We have funded operations to date primarily through the sale of common stock, convertible preferred stock, warrants, the issuance of convertible debt and, to a lesser extent, from development contract revenues, product sales, and licensing activities. At March 31, 2022, we had $55.6 million in cash and cash equivalents and $47.7 million in short-term investment securities.

Based on our current operating plan, we anticipate that we have sufficient cash and cash equivalents to fund our operations for at least the next 12 months.

Operating activities

Cash used in operating activities totaled $10.9 million during the three months ended March 31, 2022 compared to cash used in operating activities of $4.5 million during the same period in 2021. Cash used in operating activities resulted primarily from cash used to fund our net loss, after adjusting for non-cash charges such as share-based compensation, depreciation and amortization charges and changes in operating assets and liabilities. The changes in cash used in operating activities were primarily attributed to increased operating expenses to support the development of our lidar sensor.

Investing activities

During the three months ended March 31, 2022, net cash used in investing activities was $16.1 million compared to $565,000 during the three months ended March 31, 2021. During the three months ended March 31, 2022, we purchased short-term investment securities totaling $16.7 million and sold short-term investment securities totaling $1.5 million. Purchases of property and equipment during the three months ended March 31, 2022 and 2021 were $884,000 and $565,000, respectively.

Financing activities

Net cash used in financing activities totaled $49,000 during the three months ended March 31, 2022, compared to net cash provided by financing activities of $63.6 million during the same period of 2021. During the three months ended March 31, 2022, we made principal payments under long-term debt totaling $294,000 related to the loan under the Paycheck Protection Program of the 2020 CARES Act (PPP) administered by the Small Business Administration. Proceeds received from stock option exercises totaled $253,000 during the three months ended March 31, 2022 compared to $2.1 million during the same period of 2021. Principal payments under finance leases were $8,000 during the three months ended March 31, 2022 and 2021.

In June 2021, we entered into a $140.0 million ATM equity offering agreement with Craig-Hallum. Under the agreement we are able, at our discretion, to offer and sell shares of our common stock having an aggregate value of up to $140.0 million through Craig-Hallum. As of March 31, 2022, we had issued 4.0 million shares of our common stock for net proceeds of $67.8 million under this ATM agreement. There were no transactions under this agreement in the first quarter of 2022.

In February 2021, we entered into a $50.0 million ATM equity offering agreement with Craig-Hallum. Under the agreement we were able, at our discretion, to offer and sell shares of our common stock having an aggregate value of up to $50.0 million through Craig-Hallum. We have issued 2.5 million shares of our common stock for net proceeds of $48.8 million under this ATM agreement. No further shares are available for sales under this agreement.

In December 2020, we entered into a $13.0 million ATM equity offering agreement with Craig-Hallum. Under the agreement we were able to, from time to time, at our discretion offer and sell shares of our common stock having an aggregate value of up to $13.0 million through Craig-Hallum. As of December 31, 2020, we had issued 1.0 million shares for net proceeds of $6.1 million that was received in January 2021. The $6.1 million was classified as subscriptions receivable on our December 31, 2020 balance sheet and is not included in the cash balance as of December 31, 2020. In January 2021, we issued 1.1 million shares of our common stock for net proceeds of $6.6 million under the agreement. In total, we have issued 2.1 million shares of our common stock for net proceeds of $12.7 million under this ATM agreement. No further shares are available for sales under this agreement.

ITEM 3. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Interest rate and market liquidity risk

As of March 31, 2022, all of our cash and cash equivalents have variable interest rates. Therefore, we believe our exposure to market and interest rate risk is not material. Due to the generally short-term maturities of our investment securities, we believe that the market risk arising from our holdings of these financial instruments is not significant. We do not believe that inflation has had a material effect on our business, financial condition or results of operations; however, we do anticipate our labor costs to increase as a result of inflationary pressures.

Our investment policy generally directs that the investment manager should select investments to achieve the following goals: principal preservation, adequate liquidity and return. As of March 31, 2022, our cash and cash equivalents are comprised of short-term highly rated money market savings accounts and our short-term investments are comprised of highly rated corporate bonds. The values of cash and cash equivalents and investment securities, available-for-sale as of March 31, 2022, are as follows:

Foreign exchange rate risk

Our major contract and collaborative research and development agreements, product sales, and licensing activity payments are currently made in U.S. dollars. However, in the future we may enter into contracts or collaborative research and development agreements in foreign currencies that may subject us to foreign exchange rate risk. We have entered into purchase orders and supply agreements in foreign currencies in the past and may enter into such arrangements, from time to time, in the future. We believe our exposure to currency fluctuations related to these arrangements is not material. We may enter into foreign currency hedges to offset material exposure to currency fluctuations when we can adequately determine the timing and amounts of the exposure.

ITEM 4. CONTROLS AND PROCEDURES

Under the supervision and with the participation of our management, including our Principal Executive Officer and Principal Financial Officer, we have evaluated the effectiveness of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) of the Securities Exchange Act of 1934) as of the end of the period covered by this report and, based on this evaluation, our Principal Executive Officer and Principal Financial Officer have concluded that these disclosure controls and procedures are effective. There were no changes in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) of the Securities Exchange Act of 1934) that occurred during the quarter ended March 31, 2022 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

PART II.

ITEM 1. LEGAL PROCEEDINGS

We are subject to various claims and pending or threatened lawsuits in the normal course of business. We are not currently party to any other legal proceedings that management believes are reasonably possible to have a material adverse effect on our financial position, results of operations or cash flows.

ITEM 1A. RISK FACTORS

You should carefully consider the risks described below together with the other information set forth in this report, which could materially affect our business, financial condition and future results. The risks described below are not the only risks facing our company. Risks and uncertainties not currently known to us or that we currently deem to be immaterial also may materially adversely affect our business, financial condition and operating results.

Risk Factors Related to Our Business

We have a history of operating losses and expect to incur significant losses in the future.

We have had substantial losses since our inception. We cannot assure you that we will ever become or remain profitable.

The likelihood of our success must be considered in light of the expenses, difficulties and delays frequently encountered by companies formed to develop and commercialize new technologies. In particular, our operations to date have focused primarily on research and development of our LBS technology system and development of demonstration units. We are unable to accurately estimate future revenues and operating expenses based upon historical performance.

We cannot be certain that we will succeed in obtaining additional development revenue or commercializing our technology or products. In light of these factors, we expect to continue to incur significant losses and negative cash flow at least through 2022 and likely thereafter. There is significant risk that we will not achieve positive cash flow at any time in the future.

COVID-19 has had an adverse effect on our business, and the future COVID-19 effects on our financial position and business prospects are uncertain.

On March 11, 2020, the World Health Organization declared the outbreak of COVID-19 a pandemic, which continues to spread throughout the United States and the world. We are unable to accurately predict the full impact that COVID-19 may have on our operations due to numerous uncertainties, including the pandemic’s severity, duration and spread, as well as actions that may be taken by governmental authorities.

The adverse impacts of the pandemic on our business and future financial performance could include, but are not limited to:

We may require additional capital to fund our operations and to implement our business plan. Raising additional capital may dilute the value of current shareholders' investment in us.

Based on our current operating plan, we anticipate that we have sufficient cash and cash equivalents to fund our operations for at least the next 12 months. We may, however, require additional capital to fund our operating plan past that time. We may seek to obtain additional capital through the issuance of equity or debt securities, product sales and/or licensing activities. There can be no assurance that any such efforts to obtain additional capital would be successful.

We are currently focused on developing our automotive lidar module. This involves introducing new technology into an emerging market which creates significant uncertainty about our ability to accurately project revenue, costs and cash flows. Our capital requirements will depend on many factors, including, but not limited to, the commercial success of our technology, the rate at which OEMs and ODMs introduce products incorporating our technology and the market acceptance and competitive position of such products. If revenues are less than we anticipate, if the mix of revenues and the associated margins vary from anticipated amounts or if expenses exceed the amounts budgeted, we may require additional capital earlier than expected to fund our operations. In addition, our operating plan provides for the development of strategic relationships with suppliers of components, products and systems, and equipment manufacturers that may require additional investments by us.

Additional capital may not be available to us or, if available, may not be available on terms acceptable to us or on a timely basis. Raising additional capital may involve issuing securities with rights and preferences that are senior to our common stock and may dilute the value of our current shareholders' investment in us. If adequate capital resources are not available on a timely basis, we may consider limiting our operations substantially and we may be unable to continue as a going concern. This limitation of operations could include reducing investments in our research and development projects, staff, operating costs, and capital expenditures which could jeopardize our ability to achieve our business goals or satisfy our customer requirements.

Risks Related to our Financial Statements and Results

Our revenue is generated from one customer, and losing that customer would have a negative impact on our revenue.

For the three months ended March 31, 2022, one customer accounted for $350,000 in revenue, representing 100% of our total revenue. For the three months ended March 31, 2021, the same customer accounted for $479,000 in revenue, representing 100% of our total revenue. The loss of our current sole customer would negatively affect our revenue.

We identified a material weakness in our internal controls.

In the second quarter of 2021, we identified a material weakness in the controls that support our determination of the grant date of equity awards. If we identify further material weaknesses in our internal controls, our failure to establish and maintain effective disclosure controls and procedures and internal control over financial reporting could result in material misstatements in our financial statements and a failure to meet our reporting obligations. Any such failure could cause investors to lose confidence in the accuracy of our financial reports, harm our reputation and adversely affect the market price of our common stock.

Our stock price has fluctuated in the past, has recently been in decline and may be volatile in the future, and as a result, investors in our common stock could incur substantial losses.

Our stock price has fluctuated significantly in the past, and may continue to be volatile in the future. Over the 52-week period ending April 25, 2022, our common stock has traded at a low of $2.61 and a high of $28.00. We may continue to experience sustained depression or substantial volatility in our stock price in the foreseeable future unrelated to our operating performance or prospects. For the fiscal year ended December 31, 2021, we incurred a loss per share of $(0.27).

As a result of this volatility, investors may experience losses on their investment in our common stock. The market price for our common stock may be influenced by many factors, including the following:

Since the price of our common stock has fluctuated in the past, has suffered recent declines and may be volatile in the future, investors in our common stock could incur substantial losses. In the past, following periods of volatility in the market, securities class-action litigation has often been instituted against companies. Such litigation, if instituted against us, could result in substantial costs and diversion of management’s attention and resources, which could materially and adversely affect our business, financial condition, results of operations and growth prospects. There can be no guarantee that our stock price will remain at current levels or that future sales of our common stock will not be at prices lower than those sold to investors.

Additionally, securities of certain companies have in the past few years experienced significant and extreme volatility in stock price due to short sellers of shares of common stock, known as a “short squeeze.” These short squeezes have caused extreme volatility in both the stock prices of those companies and in the market, and have led to the price per share of those companies to trade at a significantly inflated rate that is disconnected from the underlying value of the company. Many investors who have purchased shares in those companies at an inflated rate face the risk of losing a significant portion of their original investment, as in many cases the price per share has declined steadily as interest in those stocks have abated. There can be no assurance that our shares will not be subject to a short squeeze in the future, and investors may lose a significant portion or all of their investment if they purchase our shares at a rate that is significantly disconnected from our underlying value.

If we are unable to maintain our listing on The Nasdaq Global Market, it could become more difficult to sell our stock in the public market.

Our common stock is listed on The Nasdaq Global Market. To maintain our listing on this market, we must meet Nasdaq's listing maintenance standards. From the initial receipt of notice in the fourth quarter of 2019 through our regaining compliance in the second quarter of 2020, our stock was at risk of being delisted due to noncompliance with the minimum required market value and closing price requirements of Nasdaq’s continued listing standards. If we are unable to continue to meet Nasdaq's listing maintenance standards for any reason, our common stock could be delisted from The Nasdaq Global Market. If our common stock were delisted, we may seek to list our common stock on The Nasdaq Capital Market, the NYSE American or on a regional stock exchange or, if one or more broker-dealer market makers comply with applicable requirements, the over-the-counter (OTC) market. Listing on such other market or exchange could reduce the liquidity of our common stock. If our common stock were to trade in the OTC market, an investor would find it more difficult to dispose of, or to obtain accurate quotations for the price of, the common stock.

A delisting from The Nasdaq Global Market and failure to obtain listing on another market or exchange would subject our common stock to so-called penny stock rules that impose additional sales practice and market-making requirements on broker-dealers who sell or make a market in such securities. Consequently, removal from The Nasdaq Global Market and failure to obtain listing on another market or exchange could affect the ability or willingness of broker-dealers to sell or make a market in our common stock and the ability of purchasers of our common stock to sell their securities in the secondary market.

On April 25, 2022, the closing price of our common stock was $3.19 per share.

Our lack of financial and technical resources relative to our competitors may limit our revenues, potential profits, overall market share or value.

Our products and potential products incorporating our LBS technology will compete with established manufacturers of existing products and companies developing new technologies. Many of our competitors have substantially greater financial, technical and other resources than we have. Because of their greater resources, our competitors may develop products or technologies that may be superior to our own. The introduction of superior competing products or technologies could result in reduced revenues, lower margins or loss of market share, any of which could reduce the value of our business. Additionally, for a variety of reasons, customers may choose to purchase from suppliers that have substantially greater financial, technical or other resources than we have.

Risks Related to Our Operations

Difficulty in qualifying a contract manufacturer or foundry for our products, or experiencing changes in our supply chain, could cause delays that may result in lost future revenues and damaged customer relationships.

Historically, we have relied on single or limited-source suppliers to manufacture our products. Establishing a relationship with a contract manufacturer or foundry is a time-consuming process, as our unique technology may require significant manufacturing process adaptation to achieve full manufacturing capacity. To the extent that we are not able to establish a relationship with a contract manufacturer or foundry in a timely manner or at prices or on other terms that are acceptable to us, we may be unable to meet contract or production milestones. Moreover, changes in our supply chain could result in increased cost and delay and subject us to risks and uncertainties regarding, but not limited to, product warranty, product liability and quality control standards. The loss of any single or limited-source supplier, the failure of any of these suppliers to perform as expected or the disruption in the supply chain of components from these suppliers could cause significant delays in product deliveries, which could result in lost future revenues and damaged customer relationships.

We are dependent on third parties to develop, manufacture, sell and market products incorporating our LBS technology, scanning modules, and the scanning module components.

Our business strategy for commercializing our technology in products incorporating LBS technology includes entering into development, manufacturing, licensing, sales and marketing arrangements with OEMs, ODMs and other third parties. These arrangements reduce our level of control over production and distribution and may subject us to risks and uncertainties regarding, but not limited to, product warranty, product liability and quality control standards.

We cannot be certain that we will be able to negotiate arrangements on acceptable terms, if at all, or that these arrangements will be successful in yielding commercially viable products. If we cannot establish these arrangements, we would require additional capital to undertake such activities on our own and would require extensive manufacturing, sales and marketing expertise that we do not currently possess and that may be difficult to obtain.

In addition, we could encounter significant delays in introducing our LBS technology or find that the development, manufacture or sale of products incorporating our technology would not be feasible. To the extent that we enter into development, manufacturing, licensing, sales and marketing or other arrangements, our revenues will depend upon the performance of third parties. We cannot be certain that any such arrangements will be successful.

We could face lawsuits related to our use of LBS technology or other technologies, which would be costly, and any adverse outcome could limit our ability to commercialize our technology or products.

We are aware of several patents held by third parties that relate to certain aspects of light scanning displays and 3D sensing products. These patents could be used as a basis to challenge the validity, limit the scope or limit our ability to obtain additional or broader patent rights of our patents. A successful challenge to the validity of our patents could limit our ability to commercialize our technology or products incorporating our LBS technology and, consequently, materially reduce our ability to generate revenues. Moreover, we cannot be certain that patent holders or other third parties will not claim infringement by us with respect to current and future technology. Because U.S. patent applications are held and examined in secrecy, it is also possible that presently pending U.S. applications could eventually be issued with claims that could be infringed by our products or our technology.

The defense and prosecution of a patent suit would be costly and time-consuming, even if the outcome were ultimately favorable to us. An adverse outcome in the defense of a patent suit could subject us to significant costs, require others and us to cease selling products incorporating our technology, require us to cease licensing our technology or require disputed rights to be licensed from third parties. Such licenses, if available, would increase our operating expenses. Moreover, if claims of infringement are asserted against our future co-development partners or customers, those partners or customers may seek indemnification from us for any damages or expenses they incur. 

If we fail to manage expansion effectively, our revenue and expenses could be adversely affected.

Our ability to successfully offer products incorporating our technology and implement our business plan in a rapidly evolving market requires an effective planning and management process. The growth in business and relationships with customers and other third parties has placed, and will continue to place, a significant strain on our management systems and resources. We will need to continue to improve our financial and managerial controls, reporting systems and procedures, and will need to continue to train and manage our work force. Following our substantial reduction in headcount in February 2020, the risks associated with strained resources are heightened.

We target customers that are large companies with substantial negotiating power and potentially competitive internal solutions; if we are unable to sell our products to these customers, our prospects will be adversely affected.

Our potential customers are large, multinational companies with substantial negotiating power relative to us and, in some instances, may have internal solutions that are competitive to our products. These large, multinational companies also have significant resources, which may allow them to acquire or develop competitive technologies either independently or in partnership with others. Accordingly, even after investing significant resources to develop a product, we may not secure a series production award or, even after securing a series production award, may not be able to commercialize a product on profitable terms. If our products are not selected by these large companies or if these companies develop or acquire competitive technology or negotiate terms that are disadvantageous to us, it will have an adverse effect on our business prospects.

Our technology and products incorporating our LBS technology may be subject to future environmental, health and safety regulations that could increase our development and production costs.

Our technology and products incorporating our LBS technology could become subject to future environmental, health and safety regulations or amendments that could negatively impact our ability to commercialize our technology and products incorporating our LBS technology. Compliance with any such new regulations would likely increase the cost to develop and produce products incorporating our LBS technology, and violations may result in fines, penalties or suspension of production. If we become subject to any environmental, health, or safety laws or regulations that require us to cease or significantly change our operations to comply, our business, financial condition and operating results could be adversely affected.

Our operating results may be adversely impacted by worldwide political and economic uncertainties and specific conditions in the markets we address.

In the recent past, general worldwide economic conditions have experienced a downturn due to slower economic activity, concerns about inflation, increased energy costs, decreased consumer confidence, reduced corporate profits and capital spending, and adverse business conditions. Any continuation or worsening of the current global economic and financial conditions could materially adversely affect: (i) our ability to raise, or the cost of, needed capital, (ii) demand for our current and future products, and (iii) our ability to commercialize products. Additionally, the outbreaks of wars or infectious diseases, both as recently experienced, may cause an unexpected downturn in economic conditions. We cannot predict the timing, strength, or duration of any economic slowdown or subsequent economic recovery, worldwide, regionally or in our industry or target market.

Because we plan to continue expanding our international operations and using foreign suppliers, our operating results could be harmed by economic, political, regulatory and other factors in foreign countries.

During 2021, we established an office in Germany and we plan to expand our presence there in the near term. In addition, we currently use foreign suppliers and plan to continue to do so to manufacture current and future components and products, where appropriate. These international operations are subject to inherent risks, which may adversely affect us, including, but not limited to:

As part of growing our business, we may make acquisitions. If we fail to successfully select, execute or integrate our acquisitions, then our business, results of operations and financial condition could be materially adversely affected.

From time to time, we may undertake acquisitions to add new products and technologies, acquire talent, gain new sales channels or enter into new markets or sales territories. In addition to possible stockholder approval, we may need approvals and licenses from relevant government authorities for the acquisitions and to comply with any applicable laws and regulations, which could result in increased delay and costs, and may disrupt our business strategy if we fail to do so. Furthermore, acquisitions and the subsequent integration of new assets, businesses, key personnel, customers, vendors and suppliers require significant attention from our management and could result in a diversion of resources from our existing business, which in turn could have an adverse effect on our operations. Acquired assets or businesses may not generate the financial results we expect. Acquisitions could result in the use of substantial amounts of cash, potentially dilutive issuances of equity securities, the occurrence of significant goodwill impairment charges, amortization expenses for other intangible assets and exposure to potential unknown liabilities of the acquired business. Moreover, the costs of identifying and consummating acquisitions may be significant.

To date, we have no experience with acquisitions and the integration of acquired technology and personnel. Failure to successfully identify, complete, manage and integrate acquisitions could materially and adversely affect our business, financial condition and results of operations and could cause our stock price to decline.

Our suppliers' facilities could be damaged or disrupted by a natural disaster or labor strike, either of which would materially affect our financial position, results of operations and cash flows.

A major catastrophe, such as an earthquake, monsoon, flood, infectious disease including the COVID-19 virus, or other natural disaster, labor strike, or work stoppage at our suppliers' facilities or our customers, could result in a prolonged interruption of our business. A disruption resulting from any one of these events could cause significant delays in product shipments and the loss of sales and customers, which could have a material adverse effect on our financial condition, results of operations, and cash flows.

If we are unable to obtain effective intellectual property protection for our products, processes and technology, we may be unable to compete with other companies.

Intellectual property protection for our products, processes and technology is important and uncertain. If we do not obtain effective intellectual property protection for our products, processes and technology, we may be subject to increased competition. Our commercial success will depend, in part, on our ability, to maintain the proprietary nature of our key technologies by securing valid and enforceable patents and effectively maintaining unpatented technology as trade secrets.

We protect our proprietary technology by seeking to obtain United States and foreign patents in our name, or licenses to third party patents, related to proprietary technology, inventions, and improvements that may be important to the development of our business. However, our patent position involves complex legal and factual questions. The standards that the United States Patent and Trademark Office and its foreign counterparts use to grant patents are not always applied predictably or uniformly and can change.

Additionally, the scope of patents is subject to interpretation by courts and their validity can be subject to challenges and defenses, including challenges and defenses based on the existence of prior art. Consequently, we cannot be certain as to the extent to which we will be able to obtain patents for our new products and technology or the extent to which the patents that we already own, protect our products and technology. Reduction in scope of protection or invalidation of our licensed or owned patents, or our inability to obtain new patents, may enable other companies to develop products that compete directly with ours on the basis of the same or similar technology.

We also rely on the law of trade secrets to protect unpatented know-how and technology to maintain our competitive position. We try to protect this know-how and technology by limiting access to the trade secrets to those of our employees, contractors and partners, with a need-to-know such information and by entering into confidentiality agreements with parties that have access to it, such as our employees, consultants and business partners. Any of these parties could breach the agreements and disclose our trade secrets or confidential information, or our competitors might learn of the information in some other way. If any trade secret not protected by a patent were to be disclosed to or independently developed by a competitor, our competitive position could be negatively affected.

We could be subject to significant product liability claims that could be time-consuming and costly, divert management attention and adversely affect our ability to obtain and maintain insurance coverage.

We could be subject to product liability claims if any of the product applications are alleged to be defective or cause harmful effects. For example, because some of the scanning modules incorporating our LBS technology could scan a low power beam of colored light into the user's eye, the testing, manufacture, marketing and sale of these products involve an inherent risk that product liability claims will be asserted against us.

Additionally, any misuse of our technology or products incorporating our LBS technology by end users or third parties that obtain access to our technology, could result in negative publicity and could harm our brand and reputation. Product liability claims or other claims related to our products or our technology, regardless of their outcome, could require us to spend significant time and money in litigation, divert management time and attention, require us to pay significant damages, harm our reputation or hinder acceptance of our products. Any successful product liability claim may prevent us from obtaining adequate product liability insurance in the future on commercially desirable or reasonable terms. An inability to obtain sufficient insurance coverage at an acceptable cost or otherwise to protect against potential product liability claims could prevent or inhibit the commercialization of our products and our LBS technology.

Our operations could be adversely impacted by information technology system failures, network disruptions, or cyber security breaches.

We rely on information technology systems to process, transmit, store, and protect electronic data between our employees, our customers and our suppliers. Our systems are vulnerable to damage or interruptions due to events beyond our control, including, but are not limited to, natural disasters, power loss, telecommunications failures, computer viruses, hacking, or other cyber security issues. Our system redundancy may be inadequate and our disaster recovery planning may be ineffective or insufficient to account for all eventualities. Additionally, we maintain insurance coverage to address certain aspects of cyber risks. Such insurance coverage may be insufficient to cover all losses or all claims that may arise, should such an event occur.

Loss of any of our key personnel could have a negative effect on the operation of our business.

Our success depends on our executive officers and other key personnel and on the ability to attract and retain qualified new personnel. Achievement of our business objectives will require substantial additional expertise in the areas of sales and marketing, research and product development and manufacturing. Competition for qualified personnel in these fields is intense, and the inability to attract and retain additional highly skilled personnel, or the loss of key personnel, could hinder our ability to compete effectively in the LBS markets and adversely affect our business strategy execution and results of operations.

Risks Related to Development for the Automotive Industry

If our products and solutions are not selected for inclusion in ADAS systems by automotive OEMs or automotive Tier 1 suppliers, our future prospects will be materially and adversely affected.

Automotive OEMs and Tier 1 suppliers design and develop ADAS technology over several years, undertaking extensive testing and qualification processes prior to selecting a product such as our lidar sensor for use in a particular system, product or vehicle model because such products will function as part of a larger system or platform and must meet certain other specifications. We have invested and will continue to invest significant time and resources to have our products considered and possibly selected by OEMs or Tier 1 suppliers for use in a particular system, product or vehicle model, which is known as a “series production win” or a “series production award.” In the case of ADAS technology, a series production award would mean that our lidar sensor and/or ADAS solution had been selected for use in a particular vehicle model. However, if we are unable to achieve a series production award with respect to a particular vehicle model, we may not have an opportunity to supply our products to the automotive OEM for that vehicle model for a period of many years. In many cases, this period can be as long as five to seven or more years. If our products are not selected by an automotive OEM or our suppliers for one vehicle model or if our products are not successful in that vehicle model, it is unlikely that our product will be deployed in other vehicle models of that OEM. If we fail to win a significant number of vehicle models from one or more of automotive OEMs or their suppliers, our future business prospects will be materially and adversely affected.

The complexity of our products and the limited visibility into the various environmental and other conditions under which potential customers may use the products could result in unforeseen delays or expenses from undetected defects, errors or reliability issues in hardware or software which could reduce the market adoption of our products, damage our reputation with prospective customers, expose us to product liability and other claims, and adversely affect our operating costs.

Our products are highly technical and complex and require high standards to manufacture and may experience defects, errors or reliability issues at various stages of development. We may be unable to timely manufacture or release products, or correct problems that have arisen or correct such problems to the customer’s satisfaction. Additionally, undetected errors, defects or security vulnerabilities could result in serious injury to the end users or bystanders of technology incorporating our products, inability of customers to commercialize technology incorporating our products, litigation against us, negative publicity and other consequences. These risks are particularly prevalent in the highly competitive ADAS market. These problems may also result in claims, including class actions, against us that could be costly to defend. Our reputation or brand may be damaged as a result of these problems and potential customers may be reluctant to buy our products, which could adversely affect our financial results.

Adverse conditions in the automotive industry or the global economy more generally could have adverse effects on our results of operations.

While we make our strategic planning decisions based on the assumption that the markets we are targeting will grow, our business is dependent, in large part on, and directly affected by, business cycles and other factors affecting the global automobile industry and global economy generally. Automotive production and sales are highly cyclical and depend on general economic conditions and other factors, including consumer spending and preferences, changes in interest rates and credit availability, consumer confidence, fuel costs, fuel availability, environmental impact, governmental incentives and regulatory requirements, and political volatility, especially in energy-producing countries and growth markets. In addition, automotive production and sales can be affected by our automotive OEM customers’ ability to continue operating in response to challenging economic conditions and in response to labor relations issues, regulatory requirements, trade agreements and other factors. The volume of automotive production in North America, Europe and the rest of the world has fluctuated, sometimes significantly, from year to year, and we expect such fluctuations to give rise to fluctuations in the demand for our products. Any significant adverse change in any of these factors may result in a reduction in automotive sales and production by our automotive OEM customers and could have a material adverse effect on our business, results of operations and financial condition.

Developments in alternative technology may adversely affect the demand for our lidar technology.

Significant developments in alternative technologies, such as cameras and radar, may materially and adversely affect our business prospects in ways we do not currently anticipate. Existing and other camera and radar technologies may emerge as OEMs’ preferred alternative to our solution, which would result in the loss of competitiveness of our lidar solution. Our R&D efforts may not be sufficient to adapt to these changes in technology and our solution may not compete effectively with these alternative systems.

ADAS features may be delayed in adoption by OEMs, which would negatively impact our business prospects.

The ADAS market is fast evolving and there is generally a lack of an established regulatory framework. Vehicle regulators globally continue to consider new and enhanced emissions requirements, including electrification, to meet environmental and economic needs as well as pursue new safety standards to address emerging traffic risks. To control new vehicle prices, among other concerns, OEMs may need to dedicate technology and cost additions to new vehicle designs to meet these emissions and safety requirements and postpone the consumer cost pressures of new ADAS features. As additional safety requirements are imposed on vehicle manufacturers, our business prospects may be materially impacted.

Because the lidar and ADAS markets are rapidly evolving, it is difficult to forecast customer adoption rates, demand, and selling prices for our products and solutions.

We are pursuing opportunities in rapidly evolving markets, including technological and regulatory changes, and it is difficult to predict the timing and size of the opportunities. For example, lidar-based ADAS solutions require complex technology and because these automotive systems depend on technology from many companies, commercialization of ADAS products could be delayed or impaired on account of certain technological components of ours or others not being ready to be deployed in vehicles. In addition, the selling prices we are able to ultimately charge in the future for the products we are currently developing may be less than what we currently project. Our future financial performance will depend on our ability to make timely investments in the correct market opportunities. If one or more of these markets experience a shift in prospective customer demand, our products may not compete as effectively, if at all, and they may not be designed into commercialized products. Given the evolving nature of the markets in which we operate, it is difficult to predict customer demand or adoption rates for our products, selling prices or the future growth of our target markets. If demand does not develop or if we cannot accurately forecast it, the size of our markets, inventory requirements or future financial results will be adversely affected.

Because lidar is new in the markets we are seeking to enter, our market forecasts may not materialize as anticipated.

Our market opportunity estimates and growth forecasts are subject to significant uncertainty and are based on assumptions and estimates that may not materialize as anticipated. These forecasts and estimates relating to the expected size and growth of the markets for lidar-based technology may prove to be inaccurate. Even if these markets experience the forecasted growth we anticipate, we may not grow our business at similar rates, or at all. Our future growth is subject to many factors, including market adoption of our products, which is subject to many risks and uncertainties. Accordingly, we cannot assure you that these forecasts will not be materially inaccurate.

ITEM 6. EXHIBITS

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.