Table of Contents

Filed pursuant to Rule 424(b)3
Registration No. 333-134666

PROSPECTUS

Microvision, Inc.

Common Stock

565,000 Shares

 


This prospectus relates to the resale of up to 565,000 shares of our common stock that were issued by us on May 3, 2006.

See “Private Placement of Common Stock” for more information about the issuance of common stock.

We are registering these shares on behalf of the selling shareholder named in this prospectus to be offered and sold by it from time to time.

 


The securities offered in this prospectus involve a high degree of risk. You should carefully consider the “ Risk Factors” set forth herein beginning on page 2 and in our future filings made with the Securities and Exchange Commission, which are incorporated by reference in this prospectus, in determining whether to purchase our securities.

Our common stock is listed on the Nasdaq National Market with the ticker symbol: “MVIS.” On May 30, 2006, the closing price of one share of our common stock on the Nasdaq National Market was $2.21.

Our executive offices are located at 6222 185th Avenue NE, Redmond, Washington 98052, and our telephone number is (425) 415-6847.

 


Neither the Securities and Exchange Commission nor any state securities commission has approved or disapproved of these securities or passed upon the adequacy or accuracy of this prospectus. Any representation to the contrary is a criminal offense.

 


The date of this prospectus is June 21, 2006.


Table of Contents

TABLE OF CONTENTS

 

RISK FACTORS

   2

THE COMPANY

   9

PRIVATE PLACEMENT OF COMMON STOCK

   10

USE OF PROCEEDS

   10

SELLING SHAREHOLDERS

   11

PLAN OF DISTRIBUTION

   12

WHERE YOU CAN FIND MORE INFORMATION

   13

LEGAL OPINION

   14

EXPERTS

   14


Table of Contents

STATEMENTS REGARDING FORWARD-LOOKING INFORMATION

This prospectus and the documents incorporated by reference in this prospectus contain forward-looking statements, within the meaning of Section 27A of the Securities Act of 1933, as amended and Section 21E of the Securities Exchange Act of 1934, as amended with respect to our financial condition, results of operations, business, and prospects. Words such as “anticipates,” “expects,” “intends,” “plans,” “believes,” “seeks,” “estimates,” “may,” “will,” and similar expressions identify forward-looking statements. Although we believe that our plans, intentions and expectations reflected in these forward-looking statements are reasonable, we cannot be certain that these plans, intentions or expectations will be achieved. Actual results, performance or achievements could differ materially from those contemplated, expressed or implied by the forward-looking statements contained or incorporated by reference in this prospectus.

Forward-looking statements include, but are not limited to, those relating to the general direction of our business, including our scanned beam display and imaging capture businesses; the ability of our scanned beam display technology or products incorporating this technology to achieve market acceptance; our ability to marshal adequate financial, management, and technical resources to develop and commercialize our technologies; our expected revenues and expenses in future periods; our ability to obtain financing; the market value of our investment in Lumera Corporation; developments in the defense, aerospace and other industries on which we have focused; and our relationships with strategic partners.

These forward-looking statements are not guarantees of future performance and are subject to risks and uncertainties that could cause actual results to differ materially from the results contemplated by the forward-looking statements. The section entitled “Risk Factors” that is set forth herein and as updated from time to time in our subsequent quarterly and annual reports describes these risks.

 

1


Table of Contents

RISK FACTORS

We have a history of operating losses and expect to incur significant losses in the future.

We have had substantial losses since our inception. We cannot assure you that we will ever become or remain profitable.

 

    As of March 31, 2006, we had an accumulated deficit of $215.2 million.

 

    We incurred consolidated net losses of $154.3 million from inception through 2003, $33.2 million in 2004, $28.2 million in 2005 and consolidated net income of $475,000 in the three months ended March 31, 2006.

The likelihood of our success must be considered in light of the expenses, difficulties and delays frequently encountered by companies formed to develop and market new technologies. In particular, our operations to date have focused primarily on research and development of the scanned beam technology and development of demonstration units. We are unable to accurately estimate future revenues and operating expenses based upon historical performance.

We cannot be certain that we will succeed in obtaining additional development contracts or that we will be able to obtain substantial customer orders for our products. In light of these factors, we expect to continue to incur substantial losses and negative cash flow at least through 2006 and likely thereafter. We cannot be certain that we will achieve positive cash flow at any time in the future.

We will require additional capital to fund our operations and to implement our business plan. If we do not obtain additional capital, we may be required to curtail our operations substantially. Raising additional capital may dilute the value of current shareholders’ shares.

Based on our current operating plan and budgeted cash requirements, we expect our cash to fund operations through June 2006. We will require additional capital to continue to fund our operations, including to:

 

    Further develop the scanned beam technology.

 

    Develop and protect our intellectual property rights.

 

    Fund long-term marketing and business development opportunities; and

 

    Add manufacturing capacity.

The Company can raise limited additional cash through the sale of its Lumera common stock in the public market under Rule 144 of the Securities Act of 1933 or through a private placement. As of May 1, 2006, Microvision owns approximately 322,000 shares of Lumera common stock that have not been pledged as collateral for the Company’s convertible notes issued as of March 11, 2005 and December 1, 2005. Based on the May 1, 2006 closing price of $3.78, the Lumera shares that have not been pledged as collateral have a market value of approximately $1.2 million. The Company may be deemed to be an affiliate of Lumera. Under Rule 144 of the Securities Act, an affiliate is entitled to sell within any three-month period a number of shares of Lumera common stock that does not exceed the greater of 1% of the then outstanding shares of Lumera common stock or the average weekly trading volume of Lumera common stock on the NASDAQ National Market during the four calendar weeks preceding the filing of a notice of the sale on Form 144. The immediate sale of Lumera stock in the public market could have a negative impact on the Lumera stock price.

Our capital requirements will depend on many factors, including, but not limited to, the rate at which we can, directly or through arrangements with original equipment manufacturers, introduce products incorporating the scanned beam and image capture technologies and the market acceptance and competitive position of such products. If revenues are less than we anticipate, if the level and mix of revenues vary from anticipated amounts

 

2


Table of Contents

and allocations or if expenses exceed the amounts budgeted, we may require additional capital earlier than June 2006 to further the development of our technologies, for expenses associated with product development, and to respond to competitive pressures or to meet unanticipated development difficulties. In addition, our operating plan provides for the development of strategic relationships with systems and equipment manufacturers that may require additional investments by us.

Additional financing may not be available to us or, if available, may not be available on terms acceptable to us on a timely basis. Raising additional capital may involve issuing securities with rights and preferences that are senior to our common stock and may dilute the value of current shareholders’ shares. If adequate funds are not available to satisfy either short-term or long-term capital requirements, we may be required to limit our operations substantially. This limitation of operations may include reductions in staff and operating costs as well as reductions in capital expenditures and investment in research and development.

The value of our investment in Lumera may decrease.

Lumera’s stock price is subject to fluctuation and may decrease, lowering the value of our investment. As of March 1, 2006 we own approximately 12% of Lumera’s common stock. Since we hold a large percentage of Lumera’s common stock, if an active market does not develop or is not sustained, it may be difficult for us to sell our shares of Lumera’s common stock at an attractive price or at all. The likelihood of Lumera’s success, and the value of the common stock we hold, must be considered in light of the risks frequently encountered by early stage companies, especially those formed to develop and market new technologies. These risks include Lumera’s potential inability to establish product sales and marketing capabilities; to establish and maintain markets for their potential products; and to continue to develop and upgrade their technologies to keep pace with changes in technology and the growth of markets using polymer materials. If Lumera is unsuccessful in meeting these challenges, its stock price, and the value of our investment, could decrease.

Our convertible notes may adversely impact our common stockholders or limit our ability to obtain additional financing.

In March 2005 and December 2005, we issued convertible notes. Among other provisions, these notes include material limitations on our ability to incur additional debt or incur liens while the convertible notes are outstanding. These limitations could materially adversely affect our ability to raise funds we expect to need in 2006 and 2007.

We cannot be certain that the scanned beam technology or products incorporating this technology will achieve market acceptance. If the scanned beam technology does not achieve market acceptance, our revenues may not grow.

Our success will depend in part on customer acceptance of the scanned beam technology. The scanned beam technology may not be accepted by manufacturers who use display technologies in their products, by systems integrators who incorporate our products into their products or by end users of these products. To be accepted, the scanned beam technology must meet the expectations of our potential customers in the defense, industrial, medical and consumer markets. If our technology fails to achieve market acceptance, we may not be able to continue to develop the scanned beam technology.

It may become more difficult to sell our stock in the public market.

Our common stock is listed for quotation on the NASDAQ National Market. To keep our listing on this market, we must meet NASDAQ’s listing maintenance standards. If we are unable to continue to meet NASDAQ’s listing maintenance standards, our common stock could be delisted from the NASDAQ National Market. If our common stock were delisted, we likely would seek to list the common stock on the NASDAQ SmallCap Market, the American Stock Exchange or on a regional stock exchange. Listing on such other market

 

3


Table of Contents

or exchange could reduce the liquidity for our common stock. If our common stock were not listed on the SmallCap Market or an exchange, trading of our common stock would be conducted in the over-the-counter market on an electronic bulletin board established for unlisted securities or directly through market makers in our common stock. If our common stock were to trade in the over-the-counter market, an investor would find it more difficult to dispose of, or to obtain accurate quotations for the price of, the common stock. A delisting from the NASDAQ National Market and failure to obtain listing on such other market or exchange would subject our securities to so-called penny stock rules that impose additional sales practice and market-making requirements on broker-dealers who sell or make a market in such securities. Consequently, removal from the NASDAQ National Market and failure to obtain listing on another market or exchange could affect the ability or willingness of broker-dealers to sell or make a market in our common stock and the ability of purchasers of our common stock to sell their securities in the secondary market. In addition, when the market price of our common stock is less than $5.00 per share, we become subject to penny stock rules even if our common stock is still listed on the NASDAQ National Market. While the penny stock rules should not affect the quotation of our common stock on the NASDAQ National Market, these rules may further limit the market liquidity of our common stock and the ability of investors to sell our common stock in the secondary market. During the first and second quarter of 2003, the third quarter of 2004, the second quarter and fourth quarter of 2005, and the first quarter of 2006, the market price of our stock traded below $5.00 per share. On May 1, 2006, the closing price of our stock was $3.78.

Our lack of the financial and technical resources relative to our competitors may limit our revenues, potential profits, overall market share or value.

Our current products and potential future products will compete with established manufacturers of existing products and companies developing new technologies. Many of our competitors have substantially greater financial, technical and other resources than us. Because of their greater resources, our competitors may develop products or technologies that are superior to our own. The introduction of superior competing products or technologies could result in reduced revenues, lower margins or loss of market share, any of which could reduce the value of our business.

We may not be able to keep up with rapid technological change and our financial results may suffer.

The information display industry has been characterized by rapidly changing technology, accelerated product obsolescence and continuously evolving industry standards. Our success will depend upon our ability to further develop the scanned beam technology and to cost effectively introduce new products and features in a timely manner to meet evolving customer requirements and compete with competitors’ product advances.

We may not succeed in these efforts because of:

 

    delays in product development,

 

    lack of market acceptance for our products, or

 

    lack of funds to invest in product development and marketing.

The occurrence of any of the above factors could result in decreased revenues, market share and value.

We could face lawsuits related to our use of the scanned beam technology or other technologies. Defending these suits would be costly and time consuming. An adverse outcome in any such matter could limit our ability to commercialize our technology and products, reduce our revenues and increase our operating expenses.

We are aware of several patents held by third parties that relate to certain aspects of scanned beam displays and image capture products. These patents could be used as a basis to challenge the validity, limit the scope or limit our ability to obtain additional or broader patent rights of our patents or patents we have licensed. A

 

4


Table of Contents

successful challenge to the validity of our patents or patents we have licensed could limit our ability to commercialize the scanned beam technology and other technologies and, consequently, materially reduce our revenues. Moreover, we cannot be certain that patent holders or other third parties will not claim infringement by us with respect to current and future technology. Because U.S. patent applications are held and examined in secrecy, it is also possible that presently pending U.S. applications will eventually be issued with claims that will be infringed by our products or the scanned beam technology. The defense and prosecution of a patent suit would be costly and time consuming, even if the outcome were ultimately favorable to us. An adverse outcome in the defense of a patent suit could subject us to significant cost, to require others and us to cease selling products that incorporate scanned beam technology, to cease licensing scanned beam technology or to require disputed rights to be licensed from third parties. Such licenses, if available, would increase our operating expenses. Moreover, if claims of infringement are asserted against our future co-development partners or customers, those partners or customers may seek indemnification from us for damages or expenses they incur.

Our planned future products are dependent on advances in technology by other companies.

We rely on and will continue to rely on technologies, such as light sources and optical components that are developed and produced by other companies. The commercial success of certain of our planned future products will depend in part on advances in these and other technologies by other companies. Due to the current business environment, many companies that are developing new technologies are reducing expenditures on research and development. This may delay the development and commercialization of components we would use to manufacture certain of our planned future products.

Our products may be subject to future health and safety regulations that could increase our development and production costs.

Products incorporating scanned beam display technology could become subject to new health and safety regulations that would reduce our ability to commercialize the scanned beam display technology. Compliance with any such new regulations would likely increase our cost to develop and produce products using the scanned beam display technology and adversely affect our financial results.

If we cannot manufacture products at competitive prices, our financial results will be adversely affected.

To date, we have produced limited quantities of our Nomad and Flic products and demonstration units for research, development and demonstration purposes. The cost per unit for these units currently exceeds the level at which we could expect to profitably sell these products. If we cannot lower our cost of production, we may face increased demands on our financial resources, possibly requiring additional equity and/or debt financing to sustain our business operations.

Our future growth will suffer if we do not achieve sufficient market acceptance of our products to compete effectively.

Our success depends, in part, on our ability to gain acceptance of our current and future products by a large number of customers. Achieving market-based acceptance for our products will require marketing efforts and the expenditure of financial and other resources to create product awareness and demand by potential customers. We may be unable to offer products consistently or at all that compete effectively with products of others on the basis of price or performance. Failure to achieve broad acceptance of our products by potential customers and to effectively compete would have a material adverse effect on our operating results.

 

5


Table of Contents

Because we plan to continue using foreign contract manufacturers, our operating results could be harmed by economic, political, regulatory and other factors in foreign countries.

We currently use a contract manufacturer in Asia to manufacture our Flic product, and we plan to continue using foreign manufacturers to manufacture some of our other products where appropriate. These international operations are subject to inherent risks, which may adversely affect us, including:

 

    political and economic instability;

 

    high levels of inflation, historically the case in a number of countries in Asia;

 

    burdens and costs of compliance with a variety of foreign laws;

 

    foreign taxes; and

 

    changes in tariff rates or other trade and monetary policies.

If we experience delays or failures in developing commercially viable products, we may have lower revenues.

We began production of the current version of our Nomad product in the first quarter of 2004. In September 2002, we introduced our Flic product. In addition, we have developed demonstration units incorporating the scanned beam technology. However, we must undertake additional research, development and testing before we are able to develop additional products for commercial sale. Product development delays by us or our potential product development partners, or the inability to enter into relationships with these partners, may delay or prevent us from introducing products for commercial sale.

If we cannot supply products in commercial quantities, we will not achieve commercial success.

We are developing our capability to manufacture products in commercial quantities. Our success depends in part on our ability to provide our components and future products in commercial quantities at competitive prices. Accordingly, we will be required to obtain access, through business partners or contract manufacturers, to manufacturing capacity and processes for the commercial production of our expected future products. We cannot be certain that we will successfully obtain access to sufficient manufacturing resources. Future manufacturing limitations of our suppliers could result in a limitation on the number of products incorporating our technology that we are able to produce.

If our licensors and we are unable to obtain effective intellectual property protection for our products and technology, we may be unable to compete with other companies.

Intellectual property protection for our products is important and uncertain. If we do not obtain effective intellectual property protection for our products, processes and technology, we may be subject to increased competition. Our commercial success will depend in part on our ability and the ability of the University of Washington and our other licensors to maintain the proprietary nature of the scanned beam display and other key technologies by securing valid and enforceable patents and effectively maintaining unpatented technology as trade secrets. We try to protect our proprietary technology by seeking to obtain United States and foreign patents in our name, or licenses to third-party patents, related to proprietary technology, inventions, and improvements that may be important to the development of our business. However, our patent position and the patent position of the University of Washington and other licensors involve complex legal and factual questions. The standards that the United States Patent and Trademark Office and its foreign counterparts use to grant patents are not always applied predictably or uniformly and can change. Additionally, the scope of patents are subject to interpretation by courts and their validity can be subject to challenges and defenses, including challenges and defenses based on the existence of prior art. Consequently, we cannot be certain as to the extent to which we will be able to obtain patents for our new products and technology or the extent to which the patents that we already own or license from others protect our products and technology. Reduction in scope of protection or invalidation

 

6


Table of Contents

of our licensed or owned patents, or our inability to obtain new patents, may enable other companies to develop products that compete with ours on the basis of the same or similar technology.

We also rely on the law of trade secrets to protect unpatented know-how and technology to maintain our competitive position. We try to protect this know-how and technology by limiting access to the trade secrets to those of our employees, contractors and partners with a need to know such information and by entering into confidentiality agreements with parties that have access to it, such as our employees, consultants and business partners. Any of these parties could breach the agreements and disclose our trade secrets or confidential information, or our competitors might learn of the information in some other way. If any trade secret not protected by a patent were to be disclosed to or independently developed by a competitor, our competitive position could be materially harmed.

We could be exposed to significant product liability claims that could be time-consuming and costly, divert management attention and adversely affect our ability to obtain and maintain insurance coverage.

We may be subject to product liability claims if any of our product applications are alleged to be defective or cause harmful effects. For example, because our scanned beam displays are designed to scan a low power beam of colored light into the user’s eye, the testing, manufacture, marketing and sale of these products involve an inherent risk that product liability claims will be asserted against us. Product liability claims or other claims related to our products, regardless of their outcome, could require us to spend significant time and money in litigation, divert management time and attention, require us to pay significant damages, harm our reputation or hinder acceptance of our products. Any successful product liability claim may prevent us from obtaining adequate product liability insurance in the future on commercially desirable or reasonable terms. An inability to obtain sufficient insurance coverage at an acceptable cost or otherwise to protect against potential product liability claims could prevent or inhibit the commercialization of our products.

We rely heavily on a limited number of development contracts with the U.S. government, which are subject to immediate termination by the government for convenience at any time, and the termination of one or more of these contracts could have a material adverse impact on our operations.

During 2005 and 2004, 35% and 42%, respectively, of Microvision’s consolidated revenue was derived from performance on a limited number of development contracts with the U.S. government. Therefore, any significant disruption or deterioration of our relationship with the U.S. government would significantly reduce our revenues. Our government programs must compete with programs managed by other contractors for limited amounts and uncertain levels of funding. The total amount and levels of funding are susceptible to significant fluctuations on a year-to-year basis. Our competitors continuously engage in efforts to expand their business relationships with the government and are likely to continue these efforts in the future. Our contracts with the government are subject to immediate termination by the government for convenience at any time. The government may choose to use contractors with competing display technologies or it may decide to discontinue any of our programs altogether. In addition, those development contracts that we do obtain require ongoing compliance with applicable government regulations. Termination of our development contracts, a shift in government spending to other programs in which we are not involved, a reduction in government spending generally, or our failure to meet applicable government regulations could have severe consequences for our results of operations.

Our products have long sales cycles, which make it difficult to plan our expenses and forecast our revenues.

Our products have lengthy sales cycles that involve numerous steps including determination of a product application, exploring the technical feasibility of a proposed product, evaluating the costs of manufacturing a product and manufacturing or contracting out the manufacturing of the product. Our long sales cycle, which can last several years, makes it difficult to predict the quarter in which sales will occur. Delays in sales could cause significant variability in our revenues and operating results for any particular quarterly period.

 

7


Table of Contents

Our development contracts may not lead to products that will be profitable.

Our developmental contracts are exploratory in nature and are intended to develop new types of products for new applications. These efforts may prove unsuccessful, and these relationships may not result in the development of products that will be profitable.

Our revenues are highly sensitive to developments in the defense industry.

Our revenues to date have been derived principally from product development research relating to defense applications of the scanned beam display technology. We believe that development programs and sales of potential products in this market will represent a significant portion of our future revenues. Developments that adversely affect the defense sector, including delays in government funding and a general economic downturn, could cause our revenues to decline substantially.

Our Virtual Retinal Display technology depends on our licenses from the University of Washington. If we lose our rights under the licenses, our operations would be adversely affected.

We have acquired the exclusive rights to the Virtual Retinal Display under a license from the University of Washington. The license expires upon expiration of the last of the University of Washington’s patents that relate to this technology, which we currently anticipate will not occur until after 2011. We could lose our exclusivity under the license if we fail to respond to an infringement action or fail to use our best efforts to commercialize the licensed technology. In addition, the University of Washington may terminate the license upon our breach and has the right to consent to all sublicense arrangements. If we were to lose our rights under the license, or if the University of Washington were to refuse to consent to future sublicenses, we would lose a competitive advantage in the market, and may even lose the ability to commercialize our products completely. Either of these results could substantially decrease our revenues.

We are dependent on third parties in order to develop, manufacture, sell and market our products.

Our strategy for commercializing the scanned beam technology and products incorporating the scanned beam technology includes entering into cooperative development, manufacturing, sales and marketing arrangements with corporate partners, original equipment manufacturers and other third parties. We cannot be certain that we will be able to negotiate arrangements on acceptable terms, if at all, or that these arrangements will be successful in yielding commercially viable products. If we cannot establish these arrangements, we would require additional capital to undertake such activities on our own and would require extensive manufacturing, sales and marketing expertise that we do not currently possess and that may be difficult to obtain. In addition, we could encounter significant delays in introducing the scanned beam technology or find that the development, manufacture or sale of products incorporating the scanned beam technology would not be feasible. To the extent that we enter into cooperative development, sales and marketing or other joint venture arrangements, our revenues will depend upon the performance of third parties. We cannot be certain that any such arrangements will be successful.

Loss of any of our key personnel could have a negative effect on the operation of our business.

Our success depends on our executive officers and other key personnel and on the ability to attract and retain qualified new personnel. Achievement of our business objectives will require substantial additional expertise in the areas of sales and marketing, research and product development and manufacturing.

Competition for qualified personnel in these fields is intense, and the inability to attract and retain additional highly skilled personnel, or the loss of key personnel, could reduce our revenues and adversely affect our business.

 

8


Table of Contents

We are dependent on a small number of customers for our revenue. Our quarterly performance may vary substantially and this variance, as well as general market conditions, may cause our stock price to fluctuate greatly and potentially expose us to litigation.

Our revenues to date have been generated primarily from a limited number of development contracts with U.S. government entities and commercial partners. Our quarterly operating results may vary significantly based on:

 

    reductions or delays in funding of development programs involving new information display technologies by the U.S. government or our current or prospective commercial partners;

 

    changes in evaluations and recommendations by any securities analysts following our stock or our industry generally;

 

    announcements by other companies in our industry;

 

    changes in business or regulatory conditions;

 

    announcements or implementation by our competitors of technological innovations or new products;

 

    the status of particular development programs and the timing of performance under specific development agreements;

 

    economic and stock market conditions; or

 

    other factors unrelated to our company or industry.

In one or more future quarters, our results of operations may fall below the expectations of securities analysts and investors and the trading price of our common stock may decline as a consequence. In addition, following periods of volatility in the market price of a company’s securities, shareholders often have instituted securities class action litigation against that company. If we become involved in a class action suit, it could divert the attention of management, and, if adversely determined, could require us to pay substantial damages.

If we fail to manage expansion effectively, our revenue and expenses could be adversely affected.

Our ability to successfully offer products and implement our business plan in a rapidly evolving market requires an effective planning and management process. We have significantly expanded the scope of our operations. The growth in business and relationships with customers and other third parties has placed, and will continue to place, a significant strain on our management systems and resources. We will need to continue to improve our financial and managerial controls, reporting systems and procedures and will need to continue to train and manage our work force.

THE COMPANY

We develop information display and capture devices and related technologies. We are developing and seek to commercialize technologies and products in two business platforms relating to the delivery of images and information:

 

    Scanned beam displays, which use scanned beam display technology to create high resolution, full motion images at the eye or on an intermediate surface when projected onto a screen. These displays are currently being refined and developed for potential automotive, defense, aerospace, industrial, medical and consumer applications.

 

    Image capture devices, which use proprietary scanning technology to capture images and information in applications such as bar code readers or cameras. These devices include bar code readers and miniature high-resolution cameras.

 

9


Table of Contents

Additional information concerning our business is set forth in our Annual Report on Form 10-K for the year ended December 31, 2005, which is incorporated by reference in the registration statement of which this prospectus constitutes a part.

Our executive offices are located at 6222 185th Avenue NE, Redmond, Washington 98052, and our telephone number is (425) 415-6847.

PRIVATE PLACEMENT OF COMMON STOCK

We entered into a conversion agreement dated May 3, 2006 with Satellite Strategic Finance Associates, LLC, or Satellite, pursuant to which Satellite agreed to convert 5,000 shares of the Company’s Series A Convertible Preferred Stock. As consideration for the conversion of the Preferred Stock, we issued a total of 1,353,066 shares of our common stock.

We also entered into a registration rights agreement with respect to the issuance of 565,000 shares of Common Stock. We have agreed to file a registration statement with respect to such Common Stock as soon as practicable and in any event by June 2, 2006, and to use our best efforts to cause the Registration Statement to become effective as soon as practicable thereafter, and in no event later than August 31, 2006. If the 45 day trailing average of the Company’s stock price is less than $3.62 on the 45th trading day after the effective date of the registration statement, the Company will pay the difference between such average and $3.62 with respect to any of the 565,000 shares issued pursuant to the conversion agreement that were sold by Satellite.

USE OF PROCEEDS

All net proceeds from the sale of the shares of common stock will go to the shareholder who offers and sells them. We will not receive any proceeds from this offering.

 

10


Table of Contents

SELLING SHAREHOLDERS

In the event the selling shareholder transfers some or all of its shares to a permitted transferee, such transferee shall not be able to use this prospectus to sell shares unless and until such transferee is identified as a selling shareholder in a supplement to this prospectus or a post-effective amendment to the registration statement of which this prospectus forms a part.

The shares listed below represent all of the shares that the selling shareholder currently beneficially owns, the number of shares it may offer and the number of shares it will own after the offering assuming it sells all of the shares that may be offered under this prospectus and assumes that the selling shareholder does not sell any of the other shares of our common stock that it beneficially owns. Its beneficial ownership percentage in our outstanding common stock after the offering is shown in the fifth column and is based on 26,589,025 shares of common stock issued and outstanding as of May 29, 2006. The selling shareholders may sell all, some or none of their shares in this offering. See “Plan of Distribution.”

 

Name of Selling Shareholder

  Number of Shares
Beneficially
Owned Prior to
Offering
  Maximum Number of
Shares to be Sold
Pursuant to this
Prospectus
  Number of Shares
Beneficially
Owned After
Offering
  Beneficial Ownership
Percentage After
Offering
 

Satellite Strategic Finance Associates, LLC.(1)

  1,995,429   565,000   1,430,429   5.38 %

(1) The discretionary investment manager of the selling shareholder is Satellite Asset Management, L.P. (“SAM”). The controlling entity of SAM is Satellite Fund Management, LLC (“SFM”). The managing members of SFM are Lief Rosenblatt, Mark Sonnino and Gabriel Nechamkin. SAM, SFM and each named individual disclaims beneficial ownership of the securities. In determining beneficial ownership of our common stock by the selling shareholder, we disregarded the contractual provisions limiting the selling shareholder’s right to convert or exercise certain warrants held by the selling shareholder so that the number of shares of our common stock beneficially owned by the selling shareholder does not exceed 4.99% of the number of shares of our common stock outstanding. The selling shareholder disclaims beneficial ownership of any shares of our common stock in excess of 4.99% of our outstanding common stock.

 

11


Table of Contents

PLAN OF DISTRIBUTION

We are registering the shares on behalf of the selling shareholder. “Selling shareholder,” as used in this prospectus, includes donees and pledgees selling shares received from the named selling shareholder after the date of this prospectus. The selling shareholder may offer shares of common stock at various times in one or more of the following transactions:

 

    in the over-the-counter market;

 

    in private transactions other than in the over-the-counter market;

 

    in connection with short sales of the shares of common stock;

 

    by pledge to secure debts and other obligations;

 

    in connection with the writing of non-traded and exchange-traded call options, in hedge transactions and in settlement of other transactions in standardized or over-the-counter options; or

 

    in a combination of any of the above transactions.

The selling shareholder may sell its shares at market prices prevailing at the time of sale, at prices related to such prevailing market prices, at negotiated prices or at fixed prices.

The selling shareholder may use broker-dealers to sell its shares. If this happens, broker-dealers will either receive discounts or commissions from the selling shareholder, or they will receive commissions from purchasers of shares for whom they acted as agents.

The selling shareholder also may resell all or a portion of the shares in open market transactions in reliance upon Rule 144 under the Securities Act, provided they meet the criteria and conform to the requirements of that Rule.

If the selling shareholder effects such transactions by selling shares of common stock to or through underwriters, broker-dealers or agents, such underwriters, broker-dealers or agents may receive commissions in the form of discounts, concessions or commissions from the selling shareholder or commissions from purchasers of the shares of common stock for whom they may act as agent or to whom they may sell as principal (which discounts, concessions or commissions as to particular underwriters, broker-dealers or agents may be in excess of those customary in the types of transactions involved). In connection with sales of the shares of common stock or otherwise, the selling shareholder may enter into hedging transactions with broker-dealers, which may in turn engage in short sales of the shares of common stock in the course of hedging in positions they assume. The selling shareholder may also sell shares of common stock short and deliver shares of common stock covered by this prospectus to close out short positions and to return borrowed shares in connection with such short sales. The selling shareholder may also loan or pledge shares of common stock to broker-dealers that in turn may sell such shares.

The selling shareholder may pledge or grant a security interest in some or all of the notes, warrants or shares of common stock owned by them and, if they default in the performance of their secured obligations, the pledgees or secured parties may offer and sell the shares of common stock from time to time pursuant to this prospectus or any amendment to this prospectus under Rule 424(b)(3) or other applicable provision of the Securities Act of 1933, as amended, amending, if necessary, the list of selling shareholders to include the pledgee, transferee or other successors in interest as selling shareholders under this prospectus. The selling shareholder also may transfer and donate the shares of common stock in other circumstances in which case the transferees, donees, pledgees or other successors in interest will be the selling beneficial owners for purposes of this prospectus.

The selling shareholder and any broker-dealer participating in the distribution of the shares of common stock may be deemed to be “underwriters” within the meaning of the Securities Act, and any commission paid, or any discounts or concessions allowed to, any such broker-dealer may be deemed to be underwriting commissions

 

12


Table of Contents

or discounts under the Securities Act. At the time a particular offering of the shares of common stock is made, a prospectus supplement, if required, will be distributed which will set forth the aggregate amount of shares of common stock being offered and the terms of the offering, including the name or names of any broker-dealers or agents, any discounts, commissions and other terms constituting compensation from the selling shareholder and any discounts, commissions or concessions allowed or reallowed or paid to broker-dealers.

Under the securities laws of some states, the shares of common stock may be sold in such states only through registered or licensed brokers or dealers. In addition, in some states the shares of common stock may not be sold unless such shares have been registered or qualified for sale in such state or an exemption from registration or qualification is available and is complied with.

There can be no assurance that the selling shareholder will sell any or all of the shares of common stock registered pursuant to the shelf registration statement, of which this prospectus forms a part.

The selling shareholder and any other person participating in such distribution will be subject to applicable provisions of the Securities Exchange Act of 1934, as amended, and the rules and regulations thereunder, including, without limitation, Regulation M of the Exchange Act, which may limit the timing of purchases and sales of any of the shares of common stock by the selling shareholders and any other participating person. Regulation M may also restrict the ability of any person engaged in the distribution of the shares of common stock to engage in market-making activities with respect to the shares of common stock. All of the foregoing may affect the marketability of the shares of common stock and the ability of any person or entity to engage in market-making activities with respect to the shares of common stock.

We will pay all expenses of the registration of the shares of common stock pursuant to the registration rights agreement, estimated to be $35,000 in total, including, without limitation, Securities and Exchange Commission filing fees and expenses of compliance with state securities or “blue sky” laws; provided, however, that the selling shareholder will pay all underwriting discounts and selling commissions, if any. We will indemnify the selling shareholder against liabilities, including some liabilities under the Securities Act, in accordance with the registration rights agreement, or the selling shareholder will be entitled to contribution. We may be indemnified by the selling shareholder against civil liabilities, including liabilities under the Securities Act, that may arise from any written information furnished to us by the selling shareholder specifically for use in this prospectus, in accordance with the related registration rights agreement, or we may be entitled to contribution.

Once sold under the shelf registration statement, of which this prospectus forms a part, the shares of common stock will be freely tradable in the hands of persons other than our affiliates.

WHERE YOU CAN FIND MORE INFORMATION

We file annual, quarterly and special reports, proxy statements and other information with the SEC. You may read and copy any document we file at the SEC’s Public Reference Room at 100 F Street, N.E., Washington, D.C. 20549. Please call the SEC at 1-800-SEC-0330 for further information on the public reference rooms. Our SEC filings are also available to the public from the SEC’s Website at “http://www.sec.gov.”

The SEC allows us to “incorporate by reference” the information we file with them, which means that we can disclose important information to you by referring you to those documents. The information incorporated by reference is considered to be part of this prospectus, and the information that we file later with the SEC will automatically update and supersede this information. We incorporate by reference the documents listed below and any future filings we will make with the SEC under Sections 13(a), 13(c), 14 or 15(d) of the Securities Exchange Act of 1934 prior to the time that all securities covered by this prospectus have been sold; provided, however, that we are not incorporating any information furnished under any of Item 2.02 or Item 7.01 of any current report on Form 8-K:

 

    Our annual report on Form 10-K for the year ended December 31, 2005;

 

13


Table of Contents
    Our Amendment No. 1 to our annual report on Form 10-K for the year ended December 31, 2005;

 

    Our Amendment No. 2 to our annual report on Form 10-K for the year ended December 31, 2005;

 

    Our Amendment No. 3 to our annual report on Form 10-K for the year ended December 31, 2005;

 

    Our quarterly report on Form 10-Q for the period ended March 31, 2006;

 

    The description of our common stock set forth in Amendment No. 1 to our Registration Statement on Form SB-2 (Registration No. 333-5276-LA), including any amendment or report filed for the purpose of updating such description, as incorporated by reference in our Registration Statement on Form 8-A (Registration No. 0-21221); and

 

    Our current reports on Form 8-K filed with the SEC on May 31, 2006, May 5, 2006, April 28, 2006, April 14, 2006, March 15, 2006, March 14, 2006, March 6, 2006, February 3, 2006 and January 19, 2006.

 

    You may request a copy of these filings, at no cost, by writing or telephoning us at the following address:

Microvision, Inc.

6222 185th Avenue NE

Redmond, Washington 98052

Attention: Investor Relations

(425) 415-6847

This prospectus is part of a registration statement that we have filed with the SEC. You should rely only on the information or representations provided in this prospectus. We have not authorized nor has the selling shareholder authorized anyone to provide you with different information. The selling shareholder is not making an offer of these securities in any state where the offer is not permitted. You should not assume that the information in this prospectus is accurate as of any date other than the date on the front of the document.

LEGAL OPINION

For the purpose of this offering, Ropes & Gray LLP, Boston, Massachusetts, is giving its opinion on the validity of the shares.

EXPERTS

The consolidated financial statements and management’s assessment of the effectiveness of internal control over financial reporting (which is included in Management’s Report on Internal Control over Financial Reporting) of Microvision, Inc. incorporated in this prospectus by reference to Microvision, Inc.’s Annual Report on Form 10-K for the year ended December 31, 2005 have been so incorporated in reliance on the report (which contains an explanatory paragraph relating to the Company’s ability to continue as a going concern as described in Note 1 to the financial statements) of PricewaterhouseCoopers LLP, an independent registered public accounting firm, given on the authority of said firm as experts in auditing and accounting.

The financial statements of Lumera Corporation incorporated in this prospectus by reference to Microvision, Inc.’s Annual Report on Form 10-K/A (Amendment No. 3 to Form 10-K) for the year ended December 31, 2005 have been so incorporated in reliance on the report of PricewaterhouseCoopers LLP, an independent registered public accounting firm, given on the authority of said firm as experts in auditing and accounting.

 

14